How much water flow do you get out of the back?  I’ve never measured it very scientifically, but there should be a steady and pretty substantial stream of water coming out.  Another thing to check is bits of an old impeller stuck in the elbow of the sea water pump – on my boat that was causing a substantial blockage.  And much easier to check that first before you pull the heat exchanger.


sebastian

 


From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Munn
Sent: Sunday, July 30, 2006 4:31 PM
To: Catalina International
Subject: catalina27-talk: Over Heating

 

Listees,

 

Need your expertise........ We have a 1986 C27 with a Universal M-18.  After about 2 hours of motoring, we over heat and the warning buzzer goes off - around 200 degrees F.  I've checked the fresh water intake screen and that's clear.  I've also inspected the freshwater impeller and that is in very good condition.  I checked the coolant when changing the oil in June and was surprised to see it low.  Added about 3 cups.  It's still over heating after an extended period of running.  Where else should I be looking? 

 

Thanks,

 

Mike Munn

Katie Bay-B

#6154

Benicia, CA 

 

 

Reply via email to