On my '85, there is a thru-hull under the v-berth. Open this to allow water to reach the head. Setting to flush will pull in sea-water and push it into the holding tank. Pump dry is used to empty the water from the bowl into the holding tank. Leaving water in the bowl is not a good thing on a boat. There will probably always be some at the very bottom of the bowl. Reset the thru-hull to closed.
Bob Mann
occasional flusher
-------------- Original message --------------
From: "Jones, Lance B" <[EMAIL PROTECTED]>
As a new owner of a 1982 C-27TR, I've been slowly learning the boat. One thing I can't figure out, I think, is how to flush the head. There are two positions on the selector. One is flush, the other is pump dry. Which setting do I use. Also, water does not appear to refill the bowl. Any suggestions?Lance B. Jones _/)
1982 C-27TR #5455Pog Mo Thoin -- Aris!
*****
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential, proprietary, and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers. GA621
