Ron,
I'm just on my out to the kids for Christmas. I'll be gone a couple of days??
I'll send you what I can when I return. May a couple of pages full ? Mine is 
also a AB1W. 
Merry Christmas
Pat
  ----- Original Message ----- 
  From: Ron Johnson 
  To: [email protected] 
  Sent: Monday, December 24, 2007 12:00 PM
  Subject: Re: catalina27-talk: Steaming light lens?


  Merry Christmas and Happy New Year!  Patrick, thanks for the reply on the 
Petter  diesel overhaul.  I would appreciate ANY information you can share on 
the removal, repair and installation of your engine.  I have disconnected  
everything and am contemplating  the  actual removal.  I plan to remove the 
engine while the boat is in the slip.  Do you have any idea on the weight of 
the engine?  The Petter is a AB1W.  I have a 1973 Catalina 27 #1114.  Thanks-Ron
    ----- Original Message ----- 
    From: Patrick R Ford 
    To: [email protected] 
    Sent: Monday, December 03, 2007 2:12 PM
    Subject: Re: catalina27-talk: Steaming light lens?


    Ron,
    I had my Petter overhauled 2 years ago.
    Pat
    Seabiscuit 3692
    Port Washington, WI
      ----- Original Message ----- 
      From: Ron Johnson 
      To: [email protected] 
      Sent: Monday, December 03, 2007 11:18 AM
      Subject: Re: catalina27-talk: Steaming light lens?


      Thanks for the info.  I am also pulling out my old Petter diesel for an 
overhaul.  Has anyone done this?-Ron
        ----- Original Message ----- 
        From: [EMAIL PROTECTED] 
        To: [email protected] 
        Sent: Monday, December 03, 2007 9:01 AM
        Subject: Re: catalina27-talk: Steaming light lens?


        Ron

        See  Bob Duerer web site http://members.aol.com/bobdeurer/home.htm I 
think he has pictures, etc. on removing a mast.

        John Jennings

        In a message dated 12/3/2007 11:51:01 A.M. Eastern Standard Time, 
[EMAIL PROTECTED] writes:
          Ron, two (among many) methods come to mind:
          1. Raft along side a buddy with a 35 to 40 footer and use one of his 
halyards
          2. On the Catalina web site there is a good example of a "gin pole" 
type of arrangement that can be easily constructed out of common lumber.
          Other than that it's not as big of a task as it would appear, just 
have plenty of strong help, think it thru and go slow.
          Mark, Gratis (6115)
          Want to keep your WHOLE PAYCHECK?
          PLEASE VISIT http://www.fairtax.org
            ----- Original Message ----- 
            From: Ron Johnson 
            To: [email protected] 
            Sent: Monday, December 03, 2007 9:25 AM
            Subject: Re: catalina27-talk: Steaming light lens?


            I have a '73 and need to do some mast work.  Since I have the boat 
in a slip and have not yet dropped the mast, can you recommend a technique ?-Ron
              ----- Original Message ----- 
              From: Sailor Chef 
              To: [email protected] 
              Sent: Sunday, December 02, 2007 8:41 PM
              Subject: Re: catalina27-talk: Steaming light lens?


              Peter, I may have one on my salvage '73, I'll check tomorrow 
morning and let
              you know.
              As far as the wiring, if yours come out the side of the mast near 
deck
              level, if so you can use the old wire to pull a new one. If not 
it's not
              that hard to drop the mast and go thru it to check for other 
problems as
              well.
              Mark, Gartis (6115)
              Want to keep your WHOLE PAYCHECK?
              PLEASE VISIT http://www.fairtax.org
              ----- Original Message -----
              From: "Peter A, Robson" <[EMAIL PROTECTED]>
              To: <[email protected]>; 
<[email protected]>
              Sent: Sunday, December 02, 2007 5:10 PM
              Subject: catalina27-talk: Steaming light lens?


              > Re: Looking for Steaming Light Lens:
              >
              > I'm wondering if anyone out there might have this [sent as
              > attachment] type of steaming light on their Catalina 27 (mine 
is from
              > 1976 or ''78). I watched from spreader level as the lens of mine
              > bounced into the murky ocean in slow motion. I'm hoping to find 
a
              > replacement lens.
              >
              > I've been through all the major mfgr's catalogues and I'm 
certain it
              > is no longer made, and I hate drilling extra holes in the mast 
to
              > install a different one.
              >
              > Also, I measured the voltage at the steaming light and it was 
only
              > about 4 volts, so obviously there is some wiring problem. Hate 
to
              > have to pull the mast to get at the wires. Can a new wire be 
pulled
              > through? Any ideas?
              >
              >
              > Best,
              >
              > Peter
              >
              > Nesika
              > Vancouver
              >


              
----------------------------------------------------------------------------
              ----


              Internal Virus Database is out-of-date.
              Checked by AVG Free Edition.
              Version: 7.5.488 / Virus Database: 269.15.3/1082 - Release Date: 
10/20/2007
              2:59 PM





--------------------------------------------------------------------


            Internal Virus Database is out-of-date.
            Checked by AVG Free Edition. 
            Version: 7.5.488 / Virus Database: 269.15.3/1082 - Release Date: 
10/20/2007 2:59 PM


        John Jennings





------------------------------------------------------------------------
        Check out AOL Money & Finance's list of the hottest products and top 
money wasters of 2007.

Reply via email to