> -----Original Message----- > From: Aristotle Pagaltzis [mailto:pagalt...@gmx.de] > Sent: 13. novembra 2014 20:22 > To: catalyst@lists.scsys.co.uk > Subject: Re: [Catalyst] Log4Perl and Catalyst startup routing table > > Hi Adam, > > * Adam Witney <awit...@sgul.ac.uk> [2014-11-13 12:45]: > > I saw this post, but I 'm not sure I can use it to get the Catalyst > > normal startup output in my logs. Is this possible? > > I guess you could make half a work-around with this module, by writing a > plugin that uses the module to log this data manually during startup. > How satisfactory that is I cannot say, since that depends on whether you also > want the normal debug output to not to go to screen and whether you need > debug mode in general. > > The problem with redirecting this stuff is that Catalyst produces the debug > output very early during its startup, before it has loaded any extensions or > plugins, so the logging facilities are the built-in stuff. > (Hm, maybe it is possible to load the logging-related modules yourself and > then hack them in with BEGIN or some such.) The code to produce this > output is part of the startup code and not well accessible separately (which > is > the whole reason for CatalystX::Info after all). > > I.e. Catalyst basically doesn’t support what you want, and any solution done > without built-in support will be ugly in some way or other. > > However maybe it can be modularised to support this. The tricky part of that > is that you do want to output this info early, so that it will be useful for > debugging e.g. when components break during loading – but OTOH it should > optionally be subject to the user’s configured logging system. How do you > resolve that contradiction? The rest of a new design should fall out of the > answer to that question automatically. >
Thanks for the suggestions. It turns out that if you use log4perl.logger.MyApp = DEBUG, Screen then you lose all the standard Catalyst output, but if you use log4perl.rootLogger = DEBUG, Screen then you get it back again. Thanks Adam _______________________________________________ List: Catalyst@lists.scsys.co.uk Listinfo: http://lists.scsys.co.uk/cgi-bin/mailman/listinfo/catalyst Searchable archive: http://www.mail-archive.com/catalyst@lists.scsys.co.uk/ Dev site: http://dev.catalyst.perl.org/