Hello, Hope you are doing great.
Please review the requirement and if you find it matching your profile then send me your updated resume *ASAP/IMMEDIATE* *Position Title: Mechanical Engineer* *Location: San Jose , CA* *Duration : 6+ Month* *Detailed JD:* The candidate should demonstrate ability to design, plan and execute development of electronic system packaging. • Should understand sheet metal tooling and plastic injection mold process • Should demonstrate knowledge in GD&T, process capability (Cpk) and statistical tolerance analysis • Should be familiar with design for manufacturability (DFM) • Should be familiar with 19-in rack system standard and data center environment. • At least 10 years of experience in a CAD tool (over 2 years of using Pro/E Wildfire or CREO a must.) • Familiar with Allegro PCB CAD tool and IDF conversion between mCAD and eCAD. • Familiar with NEBS GR-63 and MIL-STD-810 or other environmental test standard and process. • Experience in using high speed backplane connectors *Skill Sets* *Quick JD* Technology: SolidWorks & Costing tools Domain: Manufacturing 1. Understanding of the Mechanical sub components in electronic/electrical devices 2. Investigate on alternates for a low cost solution. 3. Provide proposal with ROI and cost savings. 4. Mechanical Value engineering for product. 5. Exposure to the cisco process is a big plus. *Regards* *Ashish Gupta* 1351 McCarthy Boulevard, Suit 116, Milpitas, CA, USA, 95035 *Phone* : 408-457-9381 Ext 4103 *Yahoo, Gtalk* : ashish.recruiter12 *Email* : [email protected] *URL* : WWW.idctechnologies.com -- -- To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/CBE-Software-Engineer?hl=en --- You received this message because you are subscribed to the Google Groups "CBE Software Engineer" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
