64 classes associates with 64 queues. class-default is designed for us, but still counts as one. As for your speed changing, I haven't ever tried that, but I would assume that if you configured as kbps for 75M that the policy would no longer work. If you configured based on percentages though, it should still be fine. *shrug* Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE #153, CISSP, et al. CCSI/JNCI-M/JNCI-J VP - Technical Training - IPexpert, Inc. IPexpert Sr. Technical Instructor A Cisco Learning Partner - We Accept Learning Credits! [EMAIL PROTECTED] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 http://www.ipexpert.com
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kamlesh Sharma Sent: Monday, July 09, 2007 11:26 AM To: [email protected] Subject: [OSL | CCIE_RS] The maximum number of classes and effect of speedcommand to service policy The maximum number of classes you can configure for a router-and, therefore, within a policy map-is 64. it is included with class-default or excluding class-default mean 63 manual class + classdefault or 64 manual class + class-default Both for router and policy map if i configured a fastethernet interface with the available bandwidth of 75 Mbps available 75% And if suddenly that interface got duplex mismatch or speed mismatch and becomes 10 Mbps What will happen to the policy it will get removed from the interface or will allocate the bandwidth according to 75% rule. -- Thanks Kamlesh Sharma
