The two things I couldn't find that the lab referenced were the DLCI's and the loopbacks (which Gary helped me find). The loopbacks were totally my fault, I just didn't see the text on the diagram. But I still haven't seen the DLCI's documented anywhere, I understand now but I didn't see it in the lab or in any of the documentation.
Jason Morris _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Morris Sent: Monday, February 04, 2008 1:59 PM To: Morris, Jason L.; [email protected] Subject: Re: [OSL | CCIE_RS] IP Expert 'Workbook' Questions In version 9, the BB configs are separated per lab. Some use them, some do not. It was up to the person who happened to write the individual lab. The Frame Switches on the other hand are preconfigured. There may still be some variation, because lately I added "extra" DLCIs between routers, but in general you'll have a full mesh of PVCs available. Which ones you actually use though will be dictated by the specifics in your lab at that point in time. Which lab referenced things you didn't have? While we don't give out Frame Switch configs, we don't necessarily hide things either. :) 102 will be from R1 to R2. 201 will be from R2 to R1, etc. (note, R1 isn't part of our frame switch config, just an example!) But just use "sh frame pvc | in ACT" to see what you have! :) Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al. CCSI/JNCI-M/JNCI-ER VP - Technical Training - IPexpert, Inc. IPexpert Sr. Technical Instructor A Cisco Learning Partner - We Accept Learning Credits! [EMAIL PROTECTED] Telephone: +1.810.326.1444 Fax: +1.810.454.0130 http://www.ipexpert.com _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Morris, Jason L. Sent: Monday, February 04, 2008 11:02 AM To: [email protected] Subject: [OSL | CCIE_RS] IP Expert 'Workbook' Questions I was referenced to this mailing list by ipexpert.com's online chat support, I'm in right place I assume? I have some questions about the 'Workbook'. The Global IP Scheme seems to have some missing information, like Loopbacks, there are no addresses for the BB routers, none of the DCLI's for the frame relay are on the sheet. I've only been through the first lab so some of it may be included in later labs but I just wanted to touch base. The first lab seemed to reference information that I didn't have and couldn't find, maybe I'm looking in the wrong place? Jason Morris Network Engineer III Check 'n Go 5155 Financial Way Mason, Ohio 45040 P: 513-229-6831 E: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> NOTICE: This email message and all attachments transmitted with it are intended solely for the use of the addressees and may contain legally privileged, protected or confidential information. If you have received this message in error, please notify the sender immediately by email reply and please delete this message from your computer and destroy any copies. Thank you.
