Rehman, Your Switchports are in two seperate VLAN's One is in Vlan12 the other is in Vlan100
Regards, Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Mailto: [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. On Fri, Apr 4, 2008 at 6:51 PM, <[EMAIL PROTECTED]> wrote: > Hello > > I've just purchased the CCIE R&S selfstudy set ( lab book, proctor lab, cd > and dvd ) > > I'm really stuck at task 1.4 at Lab 1 and I feel a bit embarresed to not get > this rigth. > I cannot get connectivity between R1 and R2. ( not able to ping ) > > config for R1 ( C1812 in my lab ) > ! > interface FastEthernet0 > description link to R2 > ip address 150.50.17.1 255.255.255.0 > speed 100 > full-duplex > ! > > here is config for.R2 ( C1841 ) > ! > interface FastEthernet0/1 > ip address 150.50.17.2 255.255.255.0 > speed 100 > full-duplex > end > ! > ( don't know why but I can't insert the command "no switchport" on this > interface like the proctor tells me to do.) > > Her is config for SW1( 3550 ) in this lab: > ! > interface FastEthernet0/1 > description R1 port Fa0/0 towards R2 > switchport access vlan 100 > switchport mode dynamic desirable > duplex full > ! > interface FastEthernet0/2 > description R2 port Fa1/0 > switchport access vlan 12 > switchport mode dynamic desirable > duplex full > ! > > Hope I could get some help > > Kind Regards > > Rehman > > >
