Hmmm ok... Can the individual ports come up when they are not bundled? Ie point to point? If you put the xenpaks from the working blade into the not working blade does anything happen?
On 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote: > > Yes to all your questions Zenpaks at both ends right cable being used > distance is 3ft so definitely not a problem No need for attenuators > > > > ________________________________ > > Date: Fri, 18 Apr 2008 08:57:01 +0930 > > From: [EMAIL PROTECTED] > > To: [EMAIL PROTECTED] > > Subject: Re: [OSL | CCIE_RS] Physical port in etherchannel bundle will not > come up > > CC: [email protected] > > > > > What media type are they? Same ZENPAKs at each end? Is the right > > cable being used (SM vs MM etc) Is the distance ok? Do you need > > attenuators? > > > > Cheers, > > Matt > > > > On 18/04/2008, keith quaye <[EMAIL PROTECTED]> wrote: > > > > > > > > > I am connecting to core switches together via etherchannel on their 10G > > > ports > > > I AM Running s72033-ipservices_wan-vz.122-18.SXF9.bin > on > > > THE 2 6509s for some reason the 10G ports on core B will not come > > > up. Current running Config listed below. I do a no shut and it still > says > > > shut down > > > > > > > > > interface TenGigabitEthernet9/1 > > > switchport > > > switchport trunk encapsulation dot1q > > > switchport mode trunk > > > switchport nonegotiate > > > no ip address > > > channel-group 1 mode on > > > ! > > > interface TenGigabitEthernet9/2 > > > switchport > > > switchport trunk encapsulation dot1q > > > switchport mode trunk > > > switchport nonegotiate > > > no ip address > > > channel-group 1 mode on > > > > > > > > > interface Port-channel1 > > > description Etherchannel link to Core B > > > switchport > > > switchport trunk encapsulation dot1q > > > switchport mode trunk > > > switchport nonegotiate > > > no ip address > > > > > > interface TenGigabitEthernet9/1 > > > description Etherchannel link to Core A > > > switchport > > > switchport trunk encapsulation dot1q > > > switchport mode trunk > > > switchport nonegotiate > > > shutdown > > > no ip address > > > channel-group 1 mode on > > > ! > > > interface TenGigabitEthernet9/2 > > > description Etherchannel link to Core A > > > switchport > > > switchport trunk encapsulation dot1q > > > switchport mode trunk > > > switchport nonegotiate > > > shutdown > > > no ip address > > > channel-group 1 mode on > > > interface Port-channel1 > > > description Etherchannel Port to Core A > > > switchport > > > switchport trunk encapsulation dot1q > > > switchport mode trunk > > > switchport nonegotiate > > > no ip address > > > > > > >
