What exactly do you mean by "interface bandwidth-default formula"?
The section gives clear bandwidth values for each class, which are shown in the output of the "show policy map" in the proctor guide as very close values. If you have an alternate solution, you are welcome to post it. The section solution meets the requirements as stated. Marvin Greenlee, CCIE #12237 (R&S, SP, Sec) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Progress or excuses, which one are you making? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Suresh Mishra Sent: Thursday, July 17, 2008 10:31 AM To: osl Subject: [OSL | CCIE_RS] VOL1-LAB18-18.12 I was working on this LAB today. The requirement for this LAB is to express bytes using bandwidth percent instead of bandwidth command. To calculate the percentage bandwidth, the answer in the P.G did not consider the interface bandwidth vlaue instead it used the (Interface bandwidth -default ) formula which is applicable only if "Banwidth percent remaining" command is used instead of bandwidth percent. I would like to know why the author of the P.G did not use the interface bandwidth instead used (interbw-default) thanks Suresh
