Hi Robert, On Fri, May 15, 2009 at 9:44 AM, Robert S Wyzykowski <[email protected]> wrote: > > What are you gents/gals using to do a ping sweep on the switches in place of > TCL scripts?
macros -- SW2(config)#macro name PING-IGP Enter macro commands one per line. End with the character '@'. do ping 172.16.1.1 do ping 172.16.2.2 do ping 172.16.3.3 do ping 172.16.4.4 do ping 172.16.5.5 do ping 172.16.6.6 do ping 172.16.7.7 do ping 172.16.8.8 do ping 172.16.9.9 do ping 172.16.10.10 @ SW2(config)#macro global apply PING-IGP Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 58/58/59 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.2.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 50/57/59 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.3.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 50/57/59 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.4.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 51/57/59 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.5.5, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/9 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.6.6, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 51/57/59 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.7.7, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 51/57/59 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.8.8, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.9.9, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 50/75/151 ms Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.16.10.10, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms SW2(config)# Probably a good idea to clean up after yourself. Unlike TCL scripts, these macros are stored in startup/running config. cheers, Dale
