The 2nd option would be correct. Remember, IPV6 is all hex, so keep it all on the same level.
Regards, Joe Astorino CCIE #24347 (R&S) Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com From: [email protected] [mailto:[email protected]] On Behalf Of M Jay Sent: Monday, June 29, 2009 3:51 PM To: [email protected] Subject: [OSL | CCIE_RS] IPV6 address config need help Hi, I need your help in configuring IPV6 address. Question is to configure the IPV6 address on Serial 0 interface IPv6 prefix is 3001:ABB:111::/64 Host portion must be made in EUI-64 format, Mask on all interfaces must be /64, Remaining bits of network address should be made of 3rd octet of IPv4 address of the interface. The IPV4 address on serial 0 interface is 10.10.67.6 255.255.255.0 I want to know do i need to break this 3rd octet in this manner 67 = 0 1 0 0 - 0 0 1 1 = 43 or should I take this 3rd octet as 67 which one is correct: Int S0 IPV6 enable IPV6 add 3001:ABB:111:67::/64 eui-64 OR Int S0 IPV6 enable IPV6 add 3001:ABB:111:43::/64 eui-64 Please any 1 can help me in this regard Thanks _____ Windows LiveT SkyDriveT: Get 25 GB of free online storage. Get it on your BlackBerry or iPhone. <http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009> Checked by AVG - www.avg.com Version: 8.5.375 / Virus Database: 270.12.93/2206 - Release Date: 06/29/09 05:54:00
