Friends in Studies,
A brief background... I Got hold of 4 X 3750 switches and they were
used in a stacked topology/configuration. They are working fine by
they still have the stack configuration.
I need to remove the stack configuration.. The short show run output
from one of the switch is indicated below.
How do I do remove stack configuration on the switches.
I've tried used "no switch 4 provision ws-c3750g-48ts" and I got the
error message " %Switch can not be un-provisioned when it is
physically present"
----------------------------------------
Current configuration : 4008 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname SW1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
switch 4 provision ws-c3750g-48ts
system mtu routing 1500
ip subnet-zero
---------------------------------------------------------
Please assist.
Kind Regards,
Jowi
"In Prosperity Our Friends Know Us.
In Adversity We Know Our Friends."
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail is subject to the Telkom SA electronic communication legal notice,
available at :
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
