You really don't need to do anything... Anything that isnt spoken for
in your service-policy that is applied to the interface is going to
fall under the class-default as a catch all.
The % of BW is up to you... The default is 75% of the link and will
depend what you want!
If you do max-reserved BW of 90%, the values will be adjusted as such:
20% of 90% of the link...
HTHs
On Aug 11, 2009, at 9:33 PM, M Jay wrote:
A question regarding QoS:
Confugure QoS to corresponding interface. Subscriber’s ip address and
bandwidth are as follows :
· SUB_1 : 100.100.0/24 bandwidth 20%
· SUB_2 : 100.100. 2.0/24 bandwidth 30%
· Voice : Critical voice traffic bandwidth 40%
· Class-default : Class-default for remaining bandwidth
I just need to ask what bandwidth I allocate to Class-Default ?
Should I just assign it as fair-queue or need to assign bandwidth
of 10 % which is the remaining bandwidth
under policy map:
policy-map CBWFQ
class class-default
bandwidth percent 10
or
policy-map CBWFQ
class class-default
fair-queue
and what % bandwidth I need to allocate to the interface
Interface X
max-reserved-bandwidth 90
or
Interface X
max-reserved-bandwidth 100
Plz assist
Thanks
Express your personality in color! Preview and select themes for
Hotmail®. Try it now. _______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
