Hi,
I was taking a look at a few of the issue's that you had and feel that  
this can be done, but I haven't seen the PG to see how they solved it...

Let me give a few examples:

1. The area ID can be an IP address so "area 49.002.0.0" is a valid  
area in OSPF. The area's are a 32 bit number as is. I added the last 2  
zero's but that would be a question for the proctor.

2. The system ID can be added in HEX:
        Router(config-router)#domain-id type ?
                         0005 Type 0x0005
                         0105 Type 0x0105
                         0205 Type 0x0205
                         8005 Type 0x8005

And the rest I cant help you with... HTHs a bit!

-Adrian



On Aug 23, 2009, at 11:14 AM, Wayne Lawson wrote:

> Actually - I've asked Joe to take a look at this post to ensure that
> it's definity an error. If so, it will be corrected.
>
> Regards,
>
> Wayne A. Lawson II - CCIE #5244
> Founder & President - IPexpert, Inc.
> Mailto: [email protected]
> Mobile: +1.810.334.1564
>
> :: Message sent from iPhone.
>
> On Aug 23, 2009, at 11:05 AM, Rick Mur <[email protected]> wrote:
>
>> Thank you for finding these errors.
>> Please contact [email protected] so our people can take a loot at
>> it and take care of these in a future release.
>>
>>
>> -- 
>> Regards,
>>
>> Rick Mur
>> CCIE2 #21946 (R&S / Service Provider)
>> Sr. Support Engineer – IPexpert, Inc.
>> URL: http://www.IPexpert.com
>>
>> On 23 aug 2009, at 15:49, jmangawang wrote:
>>
>>> Came across a couple of items while doing this lab that I found to  
>>> be
>>> very frustrating or confusing.
>>>
>>> 29.2 - Asked to configure system ID in hex and also to use a bad  
>>> OSPF
>>> area value (also contradicts first task).  PG addresses neither of
>>> these.
>>> 29.6 through 29.9 - None of these tasks state that the final
>>> objective
>>> of the exercise is so that the VPNs should contain the route of the
>>> other VPNs.  At least add something that says R7 should be able to
>>> ping R4s loopback.  I made it through the lab exactly as printed  
>>> only
>>> to find out that the PG wanted connectivity between R4 and R7.  It
>>> kind of goes against my mentality of only do what I am told to do.
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training,
>> please visit www.ipexpert.com
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,  
> please visit www.ipexpert.com

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to