You're right Adrian, when I compared the configs I realized the ip addresses were missing. I took a look at the final configs and the ip addresses must be configured on the truking ports. The alarm also disappeared. Thanks!!!!
Angel. On Sun, Aug 23, 2009 at 1:07 PM, Adrian Brayton <[email protected]> wrote: > Hey Angel, > I am working on multicast so I have to make it quick... > > The reason that it will ask for OSPF process ID is that you dont have an IP > address on the device. > > The flapping I am not sure but are those trunking links maybe? > > > > On Aug 23, 2009, at 12:52 PM, Angel Ramirez-Tejeda wrote: > > Dear IP Expert Team, >> >> I'm using one of your racks for this lab. When configuring OSPF on the >> catalysts where every single network must belong to area 0, I cannot create >> a neighbor relationship between them, I can do it between R8 and Cat 1, but >> not between Cat1,Cat2,Cat3,Cat4, as soon as I configure the Ospf process id, >> inmediately the switches ask for router-id, so ok, I configured it, but then >> an permanent error appears: >> >> %SW_MATM-4-MACFLAP_NOTIF: Host 0012.01a6.2f00 in vlan 1 is flapping >> between port Fa0/23 and port Fa0/19. Also when I type show ip ospf int, >> nothing appears. Maybe I'm missing something straightforward here or just >> need to eat something. Thanks. >> >> >> Angel. >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
