subnets On Fri, Aug 28, 2009 at 9:00 PM, Bryan Bartik <[email protected]> wrote:
> Ken, > > I'll give you a hint: Use ? to see what you could be missing on the > "redistribute eigrp" command under OSPF. > > > On Fri, Aug 28, 2009 at 6:51 PM, Hagen, Ken <[email protected]> wrote: > >> Hello, >> Wondering if someone can help me with a redistribution problem. In this >> configuration I'm trying to redistribute from eigrp on router "Snider" on >> the router "Robinson" which connects to router "Hodges" with ospf. I cannot >> see the Snider networks on Hodges. Here are my configs. Thanks for any >> help: >> >> >> >> Hodgesf0/0----ospf----f0/0Robinsons0/0.2----eigrp----s0/0Snider >> >> >> >> >> >> Hodges#sh run >> Building configuration... >> >> >> ! >> interface Loopback0 >> ip address 192.168.3.65 255.255.255.224 >> ! >> interface Loopback1 >> ip address 192.168.3.97 255.255.255.224 >> ! >> interface Loopback2 >> ip address 192.168.1.1 255.255.255.0 >> ! >> interface FastEthernet0/0 >> ip address 192.168.3.34 255.255.255.224 >> duplex auto >> speed auto >> ! >> >> ! >> router ospf 1 >> log-adjacency-changes >> network 192.68.3.97 0.0.0.0 area 0 >> network 192.168.1.0 0.0.0.255 area 0 >> network 192.168.3.34 0.0.0.0 area 0 >> network 192.168.3.65 0.0.0.0 area 0 >> ! >> >> end >> >> >> Hodges#sh ip route >> Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP >> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area >> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 >> E1 - OSPF external type 1, E2 - OSPF external type 2 >> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS >> level-2 >> ia - IS-IS inter area, * - candidate default, U - per-user static >> route >> o - ODR, P - periodic downloaded static route >> >> Gateway of last resort is not set >> >> C 192.168.1.0/24 is directly connected, Loopback2 >> O E2 192.168.2.0/24 [110/50] via 192.168.3.33, 00:16:19, FastEthernet0/0 >> 192.168.3.0/27 is subnetted, 3 subnets >> C 192.168.3.96 is directly connected, Loopback1 >> C 192.168.3.64 is directly connected, Loopback0 >> C 192.168.3.32 is directly connected, FastEthernet0/0 >> >> >> >> >> Robinson#sh run >> Building configuration... >> >> >> >> interface FastEthernet0/0 >> ip address 192.168.3.33 255.255.255.224 >> duplex auto >> speed auto >> ! >> interface Serial0/0 >> no ip address >> encapsulation frame-relay >> clock rate 2000000 >> ! >> interface Serial0/0.1 point-to-point >> ip address 192.168.4.5 255.255.255.252 >> no ip split-horizon >> >> frame-relay interface-dlci 102 >> ! >> interface Serial0/0.2 point-to-point >> ip address 172.16.2.21 255.255.255.252 >> no ip split-horizon >> snmp trap link-status >> frame-relay interface-dlci 103 >> ! >> interface FastEthernet0/1 >> ip address 192.168.3.129 255.255.255.224 >> duplex auto >> speed auto >> ! >> >> ! >> router eigrp 1 >> redistribute ospf 1 metric 1000 100 1 255 1500 >> redistribute eigrp 2 >> passive-interface FastEthernet0/0 >> network 192.168.3.0 >> no auto-summary >> ! >> router eigrp 2 >> redistribute eigrp 1 >> redistribute ospf 1 metric 1000 100 1 255 1500 >> network 172.16.0.0 >> network 192.168.4.0 >> no auto-summary >> ! >> router ospf 1 >> log-adjacency-changes >> summary-address 192.168.3.128 255.255.255.128 >> summary-address 172.16.0.0 255.255.0.0 >> redistribute eigrp 1 >> redistribute eigrp 2 metric 100 >> network 192.168.3.33 0.0.0.0 area 0 >> default-metric 50 >> ! >> >> end >> >> >> >> >> >> >> >> >> Snider#sh run >> Building configuration... >> >> >> interface Loopback0 >> ip address 172.16.1.1 255.255.255.0 >> ! >> interface Loopback1 >> ip address 172.16.0.1 255.255.255.255 >> ! >> >> interface Serial0/0 >> ip address 172.16.2.22 255.255.255.252 >> encapsulation frame-relay >> clock rate 2000000 >> frame-relay interface-dlci 301 >> ! >> >> ! >> interface Serial0/1 >> no ip address >> shutdown >> clock rate 2000000 >> ! >> router eigrp 2 >> network 172.16.0.0 >> no auto-summary >> >> end >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > > > -- > Bryan Bartik > CCIE #23707 (R&S), CCNP > Sr. Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com <http://www.ipexpert.com/> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
