Please find attached configurations + diagram

Just again my question is

How I am able to ping 172.16.10.1 from R2 where there is no route + even no
default gateway configured ?

I am really curious to know.



On Tue, Sep 1, 2009 at 8:46 PM, Mashburn, Vince <[email protected]>wrote:

>  Send us the configs of you R0 please.
>
>
>
> Thanks,
>
> Vince Mashburn
>
>
>
>
>
> *From:* [email protected] [mailto:
> [email protected]] *On Behalf Of *Taqdir Singh
> *Sent:* Tuesday, September 01, 2009 8:00 AM
> *To:* cyrus riobah
> *Cc:* [email protected]
> *Subject:* Re: [OSL | CCIE_RS] No IP Routing ISSUE
>
>
>
> Please note , I am sitting on* router R2* and I am pinging from there to
> loopback 172.16.10.1 which on router R0.
>
>
>
> *On router R2 - I have disabled ip routing*. then how come I am able to
> ping loopback on router R0* even if there is no route in R2*?
>
> On Tue, Sep 1, 2009 at 6:15 PM, cyrus riobah <[email protected]> wrote:
>
> Its never possible to be able to ping over a serial link (in fact a
> network on different subnets) without the routing involved.
>
> With the output of sh ip route on your R0, the statement ""S*
> 0.0.0.0/0 is directly connected, Serial0/0"" indicates that this is s
> static route readily configured to R0 hence makes it to ping anything
> connected to R0.
>
> Possibly, check all your router for a static route, S* indicates its
> existence.
>
> Regards
>
> Cyrus
>
> CCNP,CCDA,ARFE,WAAS,AWLANFE,XF
>
>
> On 9/1/09, Taqdir Singh <[email protected]> wrote:
> > Please see my attached diagram.
> > Just curious to know , how ping is successfull sitting on router R2 to
> > destination 172.16.10.1 though on R2 I have disabled ip routing and even
> > there is no default-gateway configured.
> >
> > Other curious thing I want to know - If i configure any loopback
> interface
> > on router R2.. and then try to ping 172.16.10.1 it is unsuccessfull.
> >
> > Could any1 please help whats going on here on router R2 ?
> >
> > R0#sh ip ro
> > Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> >        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> >        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> >        E1 - OSPF external type 1, E2 - OSPF external type 2
> >        i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
> level-2
> >        ia - IS-IS inter area, * - candidate default, U - per-user static
> > route
> >        o - ODR, P - periodic downloaded static route
> >
> > Gateway of last resort is 0.0.0.0 to network 0.0.0.0
> >
> >      172.16.0.0/24 is subnetted, 1 subnets
> > C       172.16.10.0 is directly connected, Loopback0
> >      10.0.0.0/24 is subnetted, 1 subnets
> > C       10.1.1.0 is directly connected, Serial0/0
> > S*   0.0.0.0/0 is directly connected, Serial0/0
> > R0#echo reply rcvd, src 172.16.10.1, dst 172.32.
> > R0#
> > ================
> >
> > R1#sh ip ro
> > Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> >        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> >        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> >        E1 - OSPF external type 1, E2 - OSPF external type 2
> >        i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
> level-2
> >        ia - IS-IS inter area, * - candidate default, U - per-user static
> > route
> >        o - ODR, P - periodic downloaded static route
> >
> > Gateway of last resort is not set
> >
> >      172.16.0.0/24 is subnetted, 1 subnets
> > S       172.16.10.0 is directly connected, Serial0/1
> >      172.32.0.0/24 is subnetted, 1 subnets
> > C       172.32.1.0 is directly connected, Serial0/2
> >      10.0.0.0/24 is subnetted, 1 subnets
> > C       10.1.1.0 is directly connected, Serial0/1
> > R1#
> > =====================
> >
> > R2#sh ip ro
> > Default gateway is not set
> >
> > Host               Gateway           Last Use    Total Uses  Interface
> > ICMP redirect cache is empty
> > R2#ping 172.16.10.1
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 12/48/136 ms
> > R2#
> >
> >
> > --
> > Taqdir Singh
> > CCNP- (R), CCNA
> > 09911709496
> >
> > Do today what others won't so you can live tomorrow as others can't
> >
>
>
>
>
> --
> Taqdir Singh
> CCNP- (R), CCNA
> 09911709496
>
> Do today what others won't so you can live tomorrow as others can't
>



-- 
Taqdir Singh
CCNP- (R), CCNA
09911709496

Do today what others won't so you can live tomorrow as others can't
R0#sh run
Building configuration...

Current configuration : 790 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R0
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
!
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 172.16.10.1 255.255.255.0
!
interface Serial0/0
 ip address 10.1.1.1 255.255.255.0
 serial restart-delay 0
!
interface Serial0/1
 no ip address
 shutdown
 serial restart-delay 0
!
interface Serial0/2
 no ip address
 shutdown
 serial restart-delay 0
!
interface Serial0/3
 no ip address
 shutdown
 serial restart-delay 0
!
ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 Serial0/0
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end

R0#
R1#sh run
Building configuration...

Current configuration : 752 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
!
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Serial0/0
 no ip address
 shutdown
 serial restart-delay 0
!
interface Serial0/1
 ip address 10.1.1.2 255.255.255.0
 serial restart-delay 0
!
interface Serial0/2
 ip address 172.32.1.1 255.255.255.0
 serial restart-delay 0
!
interface Serial0/3
 no ip address
 shutdown
 serial restart-delay 0
!
ip http server
no ip http secure-server
ip route 172.16.10.0 255.255.255.0 Serial0/1
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end

R1#
R2#sh run
Building configuration...

Current configuration : 803 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 5
no ip routing
!
!
no ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Serial0/0
 no ip address
 no ip route-cache
 shutdown
 serial restart-delay 0
!
interface Serial0/1
 no ip address
 no ip route-cache
 shutdown
 serial restart-delay 0
!
interface Serial0/2
 ip address 172.18.10.1 255.255.255.0
 no ip route-cache
 serial restart-delay 0
!
interface Serial0/3
 ip address 172.32.1.2 255.255.255.0
 no ip route-cache
 serial restart-delay 0
!
ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end

R2#

<<attachment: routing problem.jpg>>

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to