The port is in routed mode and any layer 2 switching features are disabled on it. :)
SW6-LAB2(config-if)#do sh int gi0/12 sw Name: Gi0/12 Switchport: Disabled SW6-LAB2(config-if)#do sh run int gi0/12 Building configuration... Current configuration : 86 bytes ! interface GigabitEthernet0/12 no switchport ip address 1.1.1.1 255.255.255.0 end SW6-LAB2(config-if)#do sh int gi0/12 sw Name: Gi0/12 Switchport: Disabled SW6-LAB2(config-if)#no ip add SW6-LAB2(config-if)#switchport SW6-LAB2(config-if)#do sh int gi0/12 sw Name: Gi0/12 Switchport: Enabled Administrative Mode: static access Operational Mode: static access [ ... ] Kaj > From: "Jowi Nkwe (JM)" <[email protected]> > Date: Tue, 1 Sep 2009 10:16:16 -0700 > To: <[email protected]> > Subject: [OSL | CCIE_RS] Switchport : Disabled State.. > > > > Good People, > > Just a quick question... > > If you type the following on the catalyst 3550, on the command line: > > "Show interface fa0/22 switchport" And the output it's ONLY just: > "Switchport: Disabled". > > What causes this and how to enable this switchport.. defaulting the > interface will it resolve the problem... > > My practice session ended before I could default the interface to see > the difference... > > Thanks in anticipation... > > Jowi.. > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > This e-mail is subject to the Telkom SA electronic communication legal notice, > available at : > http://www.telkom.co.za/TelkomEMailLegalNotice.PDF > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
