Ahmed, Is the f0/0 interface on R1 UP/UP?
On Thu, Sep 3, 2009 at 2:45 AM, Ahmed Haji Munye <[email protected]> wrote: > > > *R1* > > s0/0 ip add 13.1.1.1 255.255.255.0 > no shut > loop1 1.1.1.1 255.255.255.0 > loop2 2.1.2.1 255.255.255.0 > int fa0/0 131.1.1.1 255.255.255.0 > no shut > > router ospf 123 > network 13.1.1.0 0.0.0.255 are 0 > network 1.1.1.0 0.0.0.255 area 0 > redistribute connected subnets > > *R3* > > int s0/1 ip add 13.1.1.3 255.255.255.0 > clock rate 64000 > no shut > router ospf 123 > network 13.1.1.0 0.0.0.255 area 0 > > The thinf is that I don´t see the routes from fa0/0 after I typed " > redistribute connected subnet ", but I can see the 2.1.2.0 routes in R3s > routing table. > > Why don´t I see the 131.1.1.0 routes in R3s routing table, what shall I do > to solve this issue? > > Kind Regards > Ahmed > > > ------------------------------ > Går det långsamt? Skaffa dig en snabbare bredbandsuppkoppling. > Sök och jämför priser hos > Kelkoo.<http://www.kelkoo.se/c-100015813-bredband.html?partnerId=96914325> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Bryan Bartik CCIE #23707 (R&S), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
