You shouldnt have to do any NATing... You really shouldnt have to do
anything but use a CROSS over cable to hook the modem up to the
switch... The little Netgear / Linksys or whatever has that port that
says internet, but my experience is that is just a plug with a
different pinout!
HTHs
On Oct 29, 2009, at 7:55 PM, nicholas golden wrote:
OK so the noob here has a silly question. I have a 3550 I want to
hook my pc up to it and hook the 3550 to my cable modem and then of
course the internet. I know how to do it with nat, all that good
stuff with my rack of routers but I am just messing around and
seeing If I can do it on the 3550 with a single host going through
the switch to the cable modem to the internet.
Well, I can't do IP nat, inside or outside soooooooooo is there an
alternative on the 3550, or do I need a higher IOS code? Maybe some
trickery to some kind of manual nat or list or trick or something?
Tried googling it and not coming up with a whole lot :)
I have:
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version
12.2(25)SEC2,
RELEASE SOFTWARE (fc1)
So if I seem silly - slap me please 8)-
-Nick
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
