I'm thinking seed metric since eigrp unlike ospf which has a default,eigrp does not... unless I'm crazy. Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: Mustafa Yadav <[email protected]> Date: Mon, 11 Jan 2010 22:56:00 To: ccie_rs<[email protected]> Subject: [OSL | CCIE_RS] (no subject) hi all, Below between r2 and r4 eirgrp is running.When I tried to perform redistiribute lo0 in r4 by using route-map it is not going to be installed in r2 route table.However when I use network command it will appear in route table.What did I do wrong? R4# R4# R4#sh run Building configuration... Current configuration : 1050 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R4 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 ip cef ! ! ! ! no ip domain lookup ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive log config hidekeys ! ! ! ! ! ! ! ! interface Loopback0 ip address 10.1.1.4 255.255.255.255 ! interface FastEthernet0/0 ip address 10.1.24.4 255.255.255.0 speed 100 full-duplex ! interface Serial0/0 no ip address shutdown clock rate 2000000 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/1 no ip address shutdown clock rate 2000000 ! router eigrp 100 redistribute connected route-map test network 10.1.24.4 0.0.0.0 no auto-summary ! ip forward-protocol nd ! ! ip http server no ip http secure-server ! ! ! ! route-map test permit 10 match interface Loopback0 ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! line con 0 line aux 0 line vty 0 4 ! ! end R4# Current configuration : 1581 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R2 ! boot-start-marker boot-end-marker ! ! no aaa new-model memory-size iomem 5 ip cef ! ! ! ! ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! archive log config hidekeys ! ! ! ! ! ! ! ! interface Loopback0 ip address 10.1.1.2 255.255.255.255 ! interface FastEthernet0/0 no ip address speed 100 full-duplex ! interface FastEthernet0/0.12 encapsulation dot1Q 12 ip address 10.1.12.2 255.255.255.0 ! interface FastEthernet0/0.23 encapsulation dot1Q 23 ip address 10.1.23.2 255.255.255.0 ip ospf 1 area 0 ! interface FastEthernet0/0.24 encapsulation dot1Q 24 ip address 10.1.24.2 255.255.255.0 ! interface Serial0/0 no ip address shutdown clock rate 2000000 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/1 no ip address shutdown clock rate 2000000 ! router eigrp 100 network 10.1.24.2 0.0.0.0 no auto-summary ! router ospf 1 log-adjacency-changes ! router rip version 2 redistribute ospf 1 metric 3 route-map test passive-interface FastEthernet0/0.23 passive-interface FastEthernet0/0.24 network 10.0.0.0 no auto-summary ! ip forward-protocol nd ! ! ip http server no ip http secure-server ! ! ip prefix-list lo33 seq 5 permit 192.168.33.0/24 ! ! ! route-map test permit 10 match ip address prefix-list lo33 set metric 16 ! route-map test permit 20 ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! line con 0 line aux 0 line vty 0 4 ! ! end _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
