hi guys,
What are the meaning of virtual access int 1 ?Why has it benn created
automaticly?
I have done below config and give 10.3.3.1/24 and 10.3.3.2 /24 ip
address under virtual template on both routers.after then below
output has been seen.Please help...
conf t
default int s0/1
int s0/1
encapsulation ppp
no ip address
ppp multilink
no sh
int virtual-template 1
ppp multilink interleave
ppp multilink fragment delay 10
fair-queue
r1#sh ip int brief
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 10.1.12.1 YES manual up
up
Serial0/0 unassigned YES unset up
down
FastEthernet0/1 unassigned YES unset administratively
down down
Serial0/1 unassigned YES manual up
up
Virtual-Access1 10.1.12.1 YES TFTP up
up
Virtual-Template1 10.3.3.1 YES manual down
down
Virtual-Access2 unassigned YES unset down
down
Loopback0 10.1.1.1 YES manual up
up
r1#
0/5)
r3#sh ip int brief
Interface IP-Address OK? Method Status
Protocol
FastEthernet0/0 unassigned YES TFTP administratively
down down
Serial0/0 unassigned YES manual up
down
FastEthernet0/1 unassigned YES unset administratively
down down
Serial0/1 unassigned YES manual up
up
Virtual-Access1 10.3.3.2 YES TFTP up
up
Virtual-Template1 10.3.3.2 YES manual down
down
Virtual-Access2 unassigned YES unset down
down
Loopback0 10.33.3.3 YES manual up up
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
