This is common problem with windows, a possible solution which can be a work around should start few devices first, then login to them, then start few more and login to those until you load all of those. It will work. If it does not work then only solution will be a windows Xp, or best thing is Ubuntu.
HTH On Tue, Feb 2, 2010 at 12:09 AM, Cuong Lam <[email protected]> wrote: > It works great until I save and close out the project, and then reopen it. > So I am still having the same issue. > > > On Mon, Feb 1, 2010 at 2:05 PM, Nadeem Rafi <[email protected]> wrote: > >> Please dont hesitate to contact with me if there is any thing i can help. >> >> CCIE is a journey which always need companions along with it :) >> >> Best Regards, >> >> Nadeem Rafi >> >> On Mon, Feb 1, 2010 at 10:02 PM, Cuong Lam <[email protected]> wrote: >> >>> Thank you, Nadeem. I will try your proposed 3725 IOS. >>> >>> >>> On Mon, Feb 1, 2010 at 12:36 PM, Nadeem Rafi <[email protected]> wrote: >>> >>>> i think AMD 2.2 Turion is like c2d so with this specs it should run at >>>> least IPX lab setup. Your problem is Win7 or idle PC value. >>>> i dont know why you use a3jx and 3640. If you are doing RS then 3725 >>>> with c3725-advipservicesk9.124-15.T6.bin and idle value 0x6271c1a0 will do >>>> great. >>>> If you cannot change plate form / some downgraded IOS like simple >>>> enterprise then you should give some more effort to find out a good ilde pc >>>> value. >>>> If you can let me know which Track you are using may i hint about on >>>> which router finding IDLEPC will be more effective. >>>> >>>> HTH >>>> >>>> >>>> On Mon, Feb 1, 2010 at 8:21 PM, Cuong Lam <[email protected]> wrote: >>>> >>>>> also, it is a 2.2g hz processor >>>>> >>>>> On Mon, Feb 1, 2010 at 12:18 PM, Nadeem Rafi <[email protected]> wrote: >>>>> >>>>>> That will be my pleasure to help you there :) I need some basic info >>>>>> OS your run >>>>>> Plateform + IOS version you emulate >>>>>> Specs of your hardware, ram + processor >>>>>> >>>>>> rest we can figure out after finding above information. >>>>>> >>>>>> Best Regards, >>>>>> >>>>>> Nadeem Rafi >>>>>> >>>>>> On Mon, Feb 1, 2010 at 8:15 PM, Cuong Lam <[email protected]>wrote: >>>>>> >>>>>>> Hi Everyone, >>>>>>> >>>>>>> My processor continuously run at 100% utilization. I can run the >>>>>>> "Idle PC" to select a different process with a "*". It works >>>>>>> temporarily. >>>>>>> The processor runs at 100% again when I make modification later. Is >>>>>>> there a >>>>>>> permanent fix for this problem? >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Cuong >>>>>>> >>>>>>> _______________________________________________ >>>>>>> For more information regarding industry leading CCIE Lab training, >>>>>>> please visit www.ipexpert.com >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
