hi gurus,
I have stucked in mpls.the problem is I want to see advertised routes to antoher prefix. For the lab I performed CE got the routes from PEs.So I am pretty sure everytginh is working.MBGP is working .but somehow I was unable to see advertised routes.which command do I use to? I used below did not worK.. R3#sh bgp vpnv4 unicast vrf ca neighbors 4.4.4.4 advertised-routes % No such neighbor or address family R3#sh ip bg R3#sh ip bgp vp R3#sh ip bgp vpnv4 all su R3#sh ip bgp vpnv4 all summary BGP router identifier 3.3.3.3, local AS number 6500 BGP table version is 13, main routing table version 13 9 network entries using 1260 bytes of memory 9 path entries using 612 bytes of memory 6/5 BGP path/bestpath attribute entries using 744 bytes of memory 4 BGP extended community entries using 220 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory Bitfield cache entries: current 1 (at peak 1) using 32 bytes of memory BGP using 2868 total bytes of memory BGP activity 9/0 prefixes, 9/0 paths, scan interval 15 secs Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 4.4.4.4 4 6500 16 14 13 0 0 00:08:30 3 R3# _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
