Hello, No, not at all. Many many many of our students utilize dynamips!!! I just need to know the information so I can try to help you out. So you are telling me that you have the following right?
R4 Fa0/0 --> Cat1 Fa1/5 ??? Can you please explain in a little more detail the problem you are having and what your configurations are? Please post your EIGRP and interface configurations from R4 and Cat1 On Sun, Feb 14, 2010 at 2:19 AM, Mustafa Yadav <[email protected]>wrote: > Joe, > > this is a dynamips study.That is why I have delibrately relucted to > give full topology.If it is forbidden to discuss this kind of this > here I can easily stop then. > > On 2/14/10, Joe Astorino <[email protected]> wrote: > > My first question is -- Is this a proctorlabs rack? If so, I don't > > understand why you have Fa1/5 on anything. Our switches are all > 3550/3560 > > and have interfaces Fa0/0 - Fa0/24 as well as Gi0/1 , Gi0/2. > > > > On Sun, Feb 14, 2010 at 2:12 AM, Mustafa Yadav > > <[email protected]>wrote: > > > >> For the phsical setup I have shutdown all the ports in R4 not only > >> f0/0.I saw that the traffic still comes.so I do not think this traffic > >> is coming from another prot > >> > >> On 2/14/10, Mustafa Yadav <[email protected]> wrote: > >> > Before going deep can you see anything strange in below config? > >> > > >> > Rack1SW1#sh int f1/5 switchport > >> > Name: Fa1/5 > >> > Switchport: Enabled > >> > Administrative Mode: static access > >> > Operational Mode: static access > >> > Administrative Trunking Encapsulation: dot1q > >> > Operational Trunking Encapsulation: native > >> > Negotiation of Trunking: Disabled > >> > Access Mode VLAN: 105 (VLAN_105) > >> > Trunking Native Mode VLAN: 1 (default) > >> > Trunking VLANs Enabled: ALL > >> > Trunking VLANs Active: 105 > >> > Protected: false > >> > Priority for untagged frames: 0 > >> > Override vlan tag priority: FALSE > >> > Voice VLAN: none > >> > Appliance trust: none > >> > > >> > On 2/14/10, Joe Astorino <[email protected]> wrote: > >> >> First of all, let's talk about your physical setup. R4 should be > >> >> connected > >> >> to two switches: Cat1 Fa0/4 and Cat 3 Fa0/4. So, we need to get > that > >> >> straightened out first. > >> >> > >> >> On Sun, Feb 14, 2010 at 2:00 AM, Mustafa Yadav > >> >> <[email protected]>wrote: > >> >> > >> >>> hi guys, > >> >>> > >> >>> My problem is r4 is getting weird eigrp hello packets.R4 connected > to > >> >>> sw1 f1/5 and it is in vlan5.Somehow it is getting an eigrp packet > >> >>> from an address and this ip connected to swith in a router mode > .How > >> >>> come I am getting traffic into vlan5 from a router port? > >> >>> _______________________________________________ > >> >>> For more information regarding industry leading CCIE Lab training, > >> >>> please > >> >>> visit www.ipexpert.com > >> >>> > >> >> > >> >> > >> >> > >> >> -- > >> >> Regards, > >> >> > >> >> Joe Astorino CCIE #24347 (R&S) > >> >> Sr. Technical Instructor - IPexpert > >> >> Mailto: [email protected] > >> >> Telephone: +1.810.326.1444 > >> >> Live Assistance, Please visit: www.ipexpert.com/chat > >> >> eFax: +1.810.454.0130 > >> >> > >> >> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA > >> >> (R&S, > >> >> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & > >> >> Service > >> >> Provider) Certification Training with locations throughout the United > >> >> States, Europe and Australia. Be sure to check out our online > >> communities > >> >> at > >> >> www.ipexpert.com/communities and our public website at > www.ipexpert.com > >> >> > >> > > >> > > > > > > > > -- > > Regards, > > > > Joe Astorino CCIE #24347 (R&S) > > Sr. Technical Instructor - IPexpert > > Mailto: [email protected] > > Telephone: +1.810.326.1444 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA > (R&S, > > Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & > Service > > Provider) Certification Training with locations throughout the United > > States, Europe and Australia. Be sure to check out our online communities > at > > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > -- Regards, Joe Astorino CCIE #24347 (R&S) Sr. Technical Instructor - IPexpert Mailto: [email protected] Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
