Vince, I have never used a table map in this fashion. What is the exact scenario? I have only seen it used to modify route-tag and metric values when going from BGP table to route table.
On Wed, Feb 17, 2010 at 12:57 PM, Mashburn, Vince <[email protected]>wrote: > I am trying to lab up and test the BGP table-map feature, to allow routes > to be selected as best path in the BGP table but filter them from being > injected into the routing table. I cannot get it to work. I have the > following: > > > > Access-list 1 permit 10.4.1.0 0.0.0.255 > > > > Route-map BGP-TABLE p 10 > > Match ip address 1 > > > > Router bgp 1000 > > Table-map BGP-TABLE > > > > I have cleared the neighbors, but nothing happened. I even tried using a > prefix-list rather than an access-list, but no go on that either. Am I > missing something? > > > > Thanks, > > Vince Mashburn > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Bryan Bartik CCIE #23707 (R&S, SP), CCNP Sr. Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
