Hi! Task 21.5 says: "All traffic from 150.100.220.0/24 network will be placed in the high priority queue", and the solution is obviously
access-list 1 permit 150.100.220.0 0.0.0.255 priority-list 1 protocol ip high list 1 int fa0/0 priority-group 1 but it really doesn't make sense. Priority queueing is an output function and 150.100.220.0/24 is located in the direction of fa0/0, so the router will never send a packet out of fa0/0 with source address of 150.100.220.0/24. Technically ok but useless in practice. Is this a example of the "CCIE lab exam logic", I mean, even if the requirement is insane, you just have to configure what is asked? Btw, DSG task 21.2, the MQC part of it, the configuration is missing the 200.0.0.4 part alltogether (only RTP/RTCP part is checked). Since "match access-group" is not allowed, I would use some nesting: access-list 110 permit ip any host 200.0.0.4 class-map match-all AllButVoice match not protocol rtp match not protocol rtcp class-map AllBut4 match not access-group 110 policy-map NoShapingFor4 class AllBut4 shape average 7000000 875000 0 policy-map NoVoiceShaping class AllButVoice service-policy NoShapingFor4 Comments or better ways to implement this? -- Markku _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
