In this case you would get the points for 2.1 and 2.2 and you would not get the
points for 2.3.
For example the section 2 is 10pts
2.1 - 3 pts
2.2 - 3 pts
2.3 - 4 pts
You would get 6/10 pts
That is my understanding -
Now if there was a task say 2.4 that depended on other tasks and you configured
that task 2.4 correctly and misconfigured the task 2.2 then I am not sure if
you
would get the points for the 2.4 even if it was correctly configured. I will
leave it to others to comment on that one
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Marko Milivojevic
Sent: August-27-10 11:44 AM
To: Aryan
Cc: [email protected]
Subject: Re: [OSL | CCIE_RS] CCIE R&S Lab Grading
No, that is not correct. However, you ARE graded on WORKING solutions.
If your solutions don't work, anything depending on that task will get
no points.
Each task is all-or-nothing, but sections aren't.
--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
FREE CCIE training: http://bit.ly/vLecture
Mailto: [email protected]
Telephone: +1.810.326.1444
Web: http://www.ipexpert.com/
On Fri, Aug 27, 2010 at 17:08, Aryan <[email protected]> wrote:
> I heard that in new ver 4 R&S lab , the points are given on basis of full Vs
> nothing
>
> Like If Switching Section (Section 2) has 3 tasks
>
>
> 2. Switching
>
> 2.1 - VLAN and VTP configuration
> 2.2 - STP
> 2.3 - Voice VLAN
>
> and I missed section 2.3
>
> Will I get points for task 2.1 & 2.2 or nothing for complete switching
> section ?
>
> Regards,
> Aryan
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
