*Nope, its not working.*
**
*R4(config-if)#do show fram map
Serial0/0/0 (up): ip 150.100.100.2 dlci 412 (0x19C,0x64C0), dynamic,
broadcast,, status defined, active
**R4(config-if)#do sh run | s Serial0/0/0
interface Serial0/0/0
ip address 150.100.24.4 255.255.255.0
encapsulation frame-relay
frame-relay interface-dlci 412
R4(config-if)#do ping 150.100.24.2*
*Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.100.24.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R4(config-if)#*
On Thu, Sep 2, 2010 at 12:44 AM, Jason Maynard <[email protected]>wrote:
>
>
>
>
> Do sh “show frame map” to see that you are missing IP to DLCI mappings
>
>
>
> Add “frame-relay interface-dlci #” command
>
>
>
> *From:* [email protected] [mailto:
> [email protected]] *On Behalf Of *Amer Mustafa
> *Sent:* September-01-10 5:41 PM
> *To:* [email protected]
> *Subject:* [OSL | CCIE_RS] Workbook 1 , LAB6 (Frame-Relay).
>
>
>
> I am on task 6.4 for LAB 6 WB1.
>
>
>
> on R4 :
>
>
>
> *R4#show run | s Serial0/0/0**
> interface Serial0/0/0
> ip address 150.100.24.4 255.255.255.0
> encapsulation frame-relay
> R4#ping 150.100.24.4*
>
> *Type escape sequence to abort.**
> Sending 5, 100-byte ICMP Echos to 150.100.24.4, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)*
>
>
>
> on R2 :
>
>
>
> *R2(config)#do sh run | s Serial0/1/0**
> interface Serial0/1/0
> description Frame Relay Links
> ip address 150.100.100.2 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 150.100.100.2 205
> frame-relay map ip 150.100.100.6 206 broadcast
> frame-relay map ip 150.100.100.5 205 broadcast
> no frame-relay inverse-arp
> interface Serial0/1/0.1 point-to-point
> ip address 150.100.24.2 255.255.255.0
> R2(config)#do ping 150.100.24.2*
>
> *Type escape sequence to abort.**
> Sending 5, 100-byte ICMP Echos to 150.100.24.2, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
> R2(config)#*
>
>
>
> *what could be the reason ?*
>
>
>
> *======================*
>
>
>
> *regards ... *
>
> *Amer*
>
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
