Support / Marko / Tyson - Can one of you guys please look into this. Thanks!
Regards, Wayne A. Lawson II - CCIE #5244 (R&S) Founder, President & CEO - IPexpert, Inc., Proctor Labs, Inc. & Platinum Solutions Group, LLC. Mailto: [email protected] Telephone: +1.810.334.1564 eFax: +1.810.454.0244 ::Message sent from iPhone IPexpert & Proctor Labs are premier providers of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Wireless, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com or www.proctorlabs.com. Platinum Solutions Group (PSG) provides high-end consulting and staffing services with a primary emphasis on Cisco's Data Center, Network Security, Service Provider, Wireless and Unified Communications technologies. Be sure to visit www.platinumsolutionsgroup.com. CCIE-focused job community located at www.platinumplacementservices.com. Connect @ www.WayneLawson.com. On Nov 13, 2010, at 12:12 PM, "Jason Maynard" <[email protected]> wrote: > Hey Jay, > > > > I am pretty sure I that I have seen this as well some time ago. > > > > Not sure what it the problem was but I do know my configuration was correct > so I just moved on > > > > Not sure if this helps > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Jay Taylor > Sent: November-13-10 11:28 AM > To: CCIE OSL > Subject: [OSL | CCIE_RS] Proctorlabs hardware issue? > > > > I'm having an issue where whichever port I add last to an etherchannel > between Cat1 and Cat2 will continually bounce. Configuration looks correct; > is this a hardware issue? > > Cat1: > > interface FastEthernet0/23 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface FastEthernet0/24 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface Port-channel12 > switchport trunk encapsulation dot1q > switchport mode trunk > > > Cat1(config)#do sh eth sum > Flags: D - down P - bundled in port-channel > I - stand-alone s - suspended > H - Hot-standby (LACP only) > R - Layer3 S - Layer2 > U - in use f - failed to allocate aggregator > > M - not in use, minimum links not met > u - unsuitable for bundling > w - waiting to be aggregated > d - default port > > > Number of channel-groups in use: 1 > Number of aggregators: 1 > > Group Port-channel Protocol Ports > ------+-------------+-----------+----------------------------------------------- > 12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P) > > > Cat2: > > interface FastEthernet0/23 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface FastEthernet0/24 > switchport trunk encapsulation dot1q > switchport mode trunk > channel-group 12 mode desirable > ! > interface Port-channel12 > switchport trunk encapsulation dot1q > switchport mode trunk > > > Cat2(config)#do sh eth sum > Flags: D - down P - bundled in port-channel > I - stand-alone s - suspended > H - Hot-standby (LACP only) > R - Layer3 S - Layer2 > U - in use f - failed to allocate aggregator > > M - not in use, minimum links not met > u - unsuitable for bundling > w - waiting to be aggregated > d - default port > > > Number of channel-groups in use: 3 > Number of aggregators: 3 > > Group Port-channel Protocol Ports > ------+-------------+-----------+----------------------------------------------- > 12 Po12(SU) PAgP Fa0/23(P) Fa0/24(P) > 23 Po23(SU) LACP Fa0/19(P) Fa0/20(P) > 24 Po24(SU) LACP Fa0/21(P) Fa0/22(P) > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
