I am not seeing the problem. If your switch only supports dot1q you won't see it in the configuration.
Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: [email protected] Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ahmed Haji Munye Sent: Wednesday, January 12, 2011 6:15 AM To: CC IE Subject: [OSL | CCIE_RS] switchport trunk encap dot1q Hi I cannot congfigure the command below on a the switches. DLS2(config-if-range)#switchport trunk encap dot1q Please help me out! DLS2(config)#interface range f0/8, f0/12 DLS2(config-if-range)#switchport DLS2(config-if-range)#switchport trunk encap dot1q DLS2(config-if-range)#switchport mode trunk DLS2(config-if-range)#no shut _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
