Hi guys, I've a i7 with 4Gb of RAM and linux and GNS3 works without problems.
Cheers. Diego. 2011/2/16 manoj kaushal <[email protected]> > Hi Guys, > > Thanks for the Replies..but what about 25-30 routers in Troubleshooting > part > with BGP,OSPF running.. > > What Should I buy so that I can create and run Troubleshooting part too.. > > Thanks again, > Kaushal > > On Wed, Feb 16, 2011 at 1:56 PM, Matt Hill <[email protected]> wrote: > > > Well I did my lab about two years ago. > > > > In there is some Core2Duo with 4GB RAM. I was able to do a full > > IPExpert topology including the BB and "Switch" routers. > > > > In short, any Core i7 you find will be sufficient. Having said that I > > used Linux. If you use Windows it might work. I think Tyson wrote a > > blog somewhere on how to do it. Try looking through that. > > > > Cheers, > > Matt > > > > CCIE #22386 > > CCSI #31207 > > > > On 16 February 2011 18:12, manoj kaushal <[email protected]> wrote: > > > Hi Guys, > > > > > > I'm looking for a laptop which can help in my pursuit of CCIE. I'll be > > > using GNS3 for most of the part and will attach physical Switches > > whenever > > > required.. > > > > > > I'm thinking of buying Intel i7 processor.. Can anyone recommend > > spefication > > > we I should look at before buying.. > > > > > > -- > > > Kaushal > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, > please > > visit www.ipexpert.com > > > > > > > > > -- > Kaushal > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
