Hi Lukasz,
>I've configured 2 switches to be in the same VTP domain. I set up one of
them as VTP server and the other one as VTP client. I managed
>to change the server switch VTP version to be 2 but whenever I type version
2 command on the client I received.
>Cat3(config)#vtp version 2
>Configuration Revision : 0
>VTP Operating Mode : Client
>VTP Domain Name :
>MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD
>Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Run a "sho vtp stat" on the server. I'm willing to bet it doesn't look like
the above. As Marko stated, this is expected behavior. The reason is that
this "client" can't talk to the server or vice-versa, since you have no vtp
domain name set (and possibly a password mis-match). Run a "show vtp stat"
on the server and make sure the domains and passwords match ("sho vtp
password" will give you the plain text). It would appear that this "client"
switch has no domain set from your output, which is why it's VTP config
isn't matching up with the server, thus no VTP action.
-
m
HTH's,
Max
On Sun, Mar 6, 2011 at 2:51 PM, <[email protected]> wrote:
> Hi All,
>
> I've configured 2 switches to be in the same VTP domain. I set up one of
> them as VTP server and the other one as VTP client. I managed
> to change the server switch VTP version to be 2 but whenever I type version
> 2 command on the client I received.
>
> Cat3(config)#vtp version 2
> Cannot modify version in VTP client mode
>
> VTP Version : running VTP1 (VTP2 capable)
> Configuration Revision : 0
> Maximum VLANs supported locally : 1005
> Number of existing VLANs : 5
> VTP Operating Mode : Client
> VTP Domain Name :
> VTP Pruning Mode : Disabled
> VTP V2 Mode : Disabled
> VTP Traps Generation : Disabled
> MD5 digest : 0x57 0xCD 0x40 0x65 0x63 0x59 0x47 0xBD
> Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
>
> I checked cisco online documentation and it states that if you change the
> version on one of the switches to be version 2 the other capable version 2
> switches will use version 2 as well. Is that true? Can you explain why I
> cannot change the version number on the client switch?
>
>
>
> Thanks,
> Regards,
> Lukasz
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
