straight away answer to your second point : more than 1 NM-ESW will not work the way it is expected to behave until and unless these are STACKED . Now from real gear point of view ; you waste one port on each card .... connect them with a cross cable and issue stack-port CLI ..
>From GNS point of view ; you cannot do this . hence i suggest you using only one ether-switch module in ISR . Thanks Gaurav Madan CCIE On Mon, Aug 8, 2011 at 5:09 PM, jammers yann <[email protected]> wrote: > Please can anyone send me it's gns3 topology file that he used for his > studies (a gns3 topology who work fine) . > > gns3 sometimes make me crazy, i found 2 things > > 1 - speed and duplex mismatch : avoid using the standard ethernet interface > on the router (or fix on the both side speed and duplex) > 2- NM-16ESW : when you have 2 cards on a router for if you have 2 pcs each > on differents cards you're not able to ping each other even if you are in > the same vlan (try to use one card instead of 2) > > I need help, so please i need a good gns3 topology file il will adapt it to > my computer (ios nd directory) > > > thanks > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
