Hi all, in the Frame Relay cloud (provider network) we want R6 (P router) become RP for the provider multicast traffic through which we want to tunnel the customers VPN generated multicast traffic. What confuses me on the video at around 12th - 13th minute in the video the presenter defines the following on the R6:
! access-list 1 permit 239.1.1.1 access-list 1 permit 239.1.1.2 ! ip pim send-rp-announce lo0 scope 10 group-list 1 ip pim send-rp-discovery lo0 scope 10 ip pim rp-address 6.6.6.6 1 ! What confuses me is that R6 only started to be advertising it is the RP for 239.1.1.1 and 239.1.1.2 when the "1" (referencing to the acl 1) was added to the already existing last command "ip pim rp-address 6.6.6.6". My question is why? Shouldn't it have been claiming to be the RP for the 2 multicast groups already without the last command (ip pim rp-address 6.6.6.6 1) only due to "ip pim send-rp-announce lo0 scope 10 group-list 1"? Thank you in advance for any feedback. Marian _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
