Just reconfiguring them won't help you understand what went wrong! The situation you encountered in your practice could be the very situation you encounter in the real lab test. I strongly suggest you spend time understanding the problem next time you hit it before you move in - that will provide you with the BEST POSSIBLE learning experience! Much better than anything we can provide! :-)
-- Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor - IPexpert On Wed, Feb 22, 2012 at 13:36, khaled al-ajeman <[email protected]> wrote: > Hi guys, > > thanks it is working fine, what I did I just reconfigure my routers again. > > thanks to you all > > > > On Wed, Feb 22, 2012 at 6:10 PM, Bob McCouch <[email protected]> wrote: > >> Ahh, I did look at that as well, but I think he just didn't paste full >> output from the first router. >> >> >> On Wed, Feb 22, 2012 at 10:07 AM, Rogelio Gamino <[email protected]>wrote: >> >>> Hard to see on a phone. I saw this.. Network Type NON_BROADCAST but >>> didn't see it on the other output. >>> >>> >>> On Wed, Feb 22, 2012 at 10:04 AM, Bob McCouch <[email protected]> wrote: >>> >>>> Sure they do. He didn't paste the very top of the 'sh ip ospf int' >>>> command for the first router, but the timers are both: >>>> >>>> Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5 >>>> >>>> And they're both frame-relay multipoint subinterfaces, with no 'ip ospf >>>> network' command configured. What leads you to believe the network types >>>> don't match? >>>> >>>> He also clearly has the neighbor statement on R2, since you can see in >>>> the R2 neighbor output that R2 is in "Attempt" and knows the IP of the R5 >>>> neighbor, but not the RID. >>>> >>>> >>>> On Wed, Feb 22, 2012 at 9:23 AM, Rogelio Gamino <[email protected]>wrote: >>>> >>>>> Your network types don't match. >>>>> On Feb 22, 2012 5:20 AM, "khaled al-ajeman" <[email protected]> >>>>> wrote: >>>>> >>>>> > Would you please guys help me with this problem althought I have done >>>>> my >>>>> > configuration correctly. By the way there is neighborhood >>>>> relationship >>>>> > between R2 AND R6, >>>>> > but there is no relationship between R2 AND R5. >>>>> > >>>>> > >>>>> > >>>>> > R 2 >>>>> > >>>>> > Transmit Delay is 1 sec, State DR, Priority 1 >>>>> > Designated Router (ID) 224.0.0.0, Interface address 150.100.100.2 >>>>> > No backup designated router on this network >>>>> > Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit >>>>> 5 >>>>> > oob-resync timeout 120 >>>>> > Hello due in 00:00:20 >>>>> > Supports Link-local Signaling (LLS) >>>>> > Cisco NSF helper support enabled >>>>> > IETF NSF helper support enabled >>>>> > Index 1/4, flood queue length 0 >>>>> > Next 0x0(0)/0x0(0) >>>>> > Last flood scan length is 1, maximum is 31 >>>>> > Last flood scan time is 0 msec, maximum is 12 msec >>>>> > Neighbor Count is 1, Adjacent neighbor count is 1 >>>>> > Adjacent with neighbor 200.0.0.6 >>>>> > Suppress hello for 0 neighbor(s) >>>>> > Message digest authentication enabled >>>>> > Youngest key id is 2 >>>>> > ---------------------------------------> KEY ID is different than R5, >>>>> WHY? >>>>> > >>>>> > R5 >>>>> > >>>>> > R5(config-router)#do sh ip os int s0/0.56 >>>>> > Serial0/0.56 is up, line protocol is up >>>>> > Internet Address 150.100.100.5/24, Area 0 >>>>> > Process ID 1, Router ID 200.0.0.5, Network Type NON_BROADCAST, Cost: >>>>> 1562 >>>>> > Transmit Delay is 1 sec, State DROTHER, Priority 0 >>>>> > No designated router on this network >>>>> > No backup designated router on this network >>>>> > Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit >>>>> 5 >>>>> > oob-resync timeout 120 >>>>> > Hello due in 00:00:18 >>>>> > Supports Link-local Signaling (LLS) >>>>> > Cisco NSF helper support enabled >>>>> > IETF NSF helper support enabled >>>>> > Index 2/3, flood queue length 0 >>>>> > Next 0x0(0)/0x0(0) >>>>> > Last flood scan length is 0, maximum is 28 >>>>> > Last flood scan time is 0 msec, maximum is 8 msec >>>>> > Neighbor Count is 0, Adjacent neighbor count is 0 >>>>> > Suppress hello for 0 neighbor(s) >>>>> > Message digest authentication enabled >>>>> > Youngest key id is 1 >>>>> > ---------------------- KEY ID IS DIFFERENT ? >>>>> > >>>>> > R2 >>>>> > >>>>> > interface Serial0/0.256 multipoint >>>>> > bandwidth 64 >>>>> > ip address 150.100.100.2 255.255.255.0 >>>>> > ip ospf message-digest-key 1 md5 IPexpert ------> I have to have >>>>> two >>>>> > keys one going to R5 AND one going heading to R6 with different keys >>>>> and >>>>> > passwords >>>>> > ip ospf message-digest-key 2 md5 CCIE >>>>> > delay 2000 >>>>> > snmp trap link-status >>>>> > frame-relay map ip 150.100.100.5 205 broadcast >>>>> > frame-relay map ip 150.100.100.6 206 broadcast >>>>> > frame-relay map ip 150.100.100.2 206 >>>>> > >>>>> > >>>>> > R2(config-subif)#do sh ip os nei >>>>> > >>>>> > Neighbor ID Pri State Dead Time Address >>>>> Interface >>>>> > N/A 0 ATTEMPT/DROTHER - 150.100.100.5 >>>>> > Serial0/0.256 >>>>> > 200.0.0.6 0 FULL/DROTHER 00:01:46 150.100.100.6 >>>>> > Serial0/0.256 >>>>> > 200.0.0.4 0 FULL/ - 00:00:37 150.100.24.4 >>>>> > Serial0/0.24 >>>>> > 200.0.0.5 0 FULL/ - 00:00:33 150.100.25.5 >>>>> Serial0/2 >>>>> > 200.0.0.1 1 FULL/DR 00:00:37 150.100.12.1 >>>>> > FastEthernet0/1 >>>>> > R2(config-subif)# >>>>> > >>>>> > R5 >>>>> > >>>>> > interface Serial0/0.56 multipoint >>>>> > bandwidth 64 >>>>> > ip address 150.100.100.5 255.255.255.0 >>>>> > ip ospf message-digest-key 1 md5 IPexpert >>>>> > ip ospf priority 0 >>>>> > delay 2000 >>>>> > snmp trap link-status >>>>> > frame-relay map ip 150.100.100.5 502 >>>>> > frame-relay map ip 150.100.100.6 502 >>>>> > frame-relay map ip 150.100.100.2 502 broadcast >>>>> > end >>>>> > THANKS, >>>>> > >>>>> > KHALED >>>>> > _______________________________________________ >>>>> > For more information regarding industry leading CCIE Lab training, >>>>> please >>>>> > visit www.ipexpert.com >>>>> > >>>>> > Are you a CCNP or CCIE and looking for a job? Check out >>>>> > www.PlatinumPlacement.com <http://www.platinumplacement.com/> >>>>> > >>>>> > http://onlinestudylist.com/mailman/listinfo/ccie_rs >>>>> > >>>>> _______________________________________________ >>>>> For more information regarding industry leading CCIE Lab training, >>>>> please visit www.ipexpert.com >>>>> >>>>> Are you a CCNP or CCIE and looking for a job? Check out >>>>> www.PlatinumPlacement.com <http://www.platinumplacement.com/> >>>>> >>>>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >>>>> >>>> >>>> >>> >> > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
