and I forget to mention that these servers are 2501 On Thu, Mar 22, 2012 at 9:03 PM, Mina Farid <[email protected]> wrote:
> Hi People, > > > > I have just put together a home lab, all is OK except an issue I am having > with the access server > > The terminal server cannot connect the 2500 routers (backbones) I can > login to these routers using normal console cable with nothing special > > The terminal server can connect to all other servers with no issues! The > message I am getting is BB1 open and then nothing and no output at all > > I have tried to swap cables with no luck > > > sh vers below > > > Cisco Internetwork Operating System Software > > IOS (tm) 3000 Software (IGS-I-L), Version 11.1(8), RELEASE SOFTWARE (fc1) > > Copyright (c) 1986-1996 by cisco Systems, Inc. > > Compiled Thu 05-Dec-96 12:16 by tamb > > Image text-base: 0x0301FF88, data-base: 0x00001000 > > > ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE > > ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE > SOFTWARE (fc1) > > > Access-Server uptime is 1 hour, 43 minutes > > System restarted by power-on > > System image file is "flash:igs-i-l.111-8", booted via flash > > > cisco 2511 (68030) processor (revision D) with 2048K/2048K bytes of memory. > > Processor board ID 02280119, with hardware revision 00000000 > > Bridging software. > > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. > > 1 Ethernet/IEEE 802.3 interface. > > 2 Serial network interfaces. > > 16 terminal lines. > > 32K bytes of non-volatile configuration memory. > > 8192K bytes of processor board System flash (Read ONLY) > > > Configuration register is 0x2102 > > > > Any ideas? > > > > > Cheers > > > Mena > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
