Hi there,
Can anyone help me, why I am not being able to see my BB1 routes going via
100.100.100.100 instead of going through CAT through the routes
150.101.81.108,
here is my configuration
R8
R8(config-if)#DO sir 100.100.100.100
--------------------------------------------> bb1 route
Routing entry for 100.100.100.0/24
Known via "eigrp 7800", distance 170, metric 2560512256
---------------> It suppose to be eigrp 12348 before I add up
the offest-list command
Tag 120, type external
Redistributing via eigrp 7800
Last update from 150.100.78.7 on Serial0/0, 00:12:18 ago
Routing Descriptor Blocks:
* 150.100.78.7, from 150.100.78.7, 00:12:18 ago, via Serial0/0
Route metric is 2560512256, traffic share count is 1
Total delay is 20010 microseconds, minimum bandwidth is 1 Kbit
Reliability 1/255, minimum MTU 1 bytes
Loading 1/255, Hops 1
Route tag 120
.
R8
router eigrp 12348
passive-interface default
no passive-interface Serial0/1
offset-list 0 in 512000
FastEthernet0/0 --------------------------------> offest-list command
does change the route path of my backbone routes
network 150.50.81.0 0.0.0.255
network 150.100.81.0 0.0.0.255
My question for you fellas, why am I not being able to see the path route
of the backbone route 100.100.100.100 going throught the cat 1 ( eigrp
12348) by default before
I configuer the offe-list statement? any thoughts
thanks to you all,
khaled
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
