Fulvio, for the two configs (DHCP & IPCP) post output of *show run | s Dialer|Virtual|pool|dhcp*
along with * * *show ip int dialer | i Internet* On 11 May 2012 09:38, Fulvio allegretti <[email protected]> wrote: > > Hi there, > I have bumped into this and I am trying to understand the logic behind it. > The set up is two routers running PPPoE with the client ip address being > negotiated by IPCP. I then run MPLS over it, just adding mpls ip on the > interfaces, I've got my static routes to the loopbacks, neighbors come up, > I've got labels, it's all good execept that I can't ping the other end, I > can't sill ping the loopbacks. Change the ip assignment method to DHCP and > it is all working. Change it back to IPCP, no pin. Remove MPLS, ping is > back. Put MPLS back on, no ping. Change to DHCP ping is back. You get the > picture.........SIIL (stuck in ignorant loop that is). Fulvio > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Olugbenga Oyebande MD, DAIT 234-803-302-5287 http://www.dait-ng.com Cisco Networks, Network Security & Quality of Service DAIT Linux Enterprise Network Servers, Web Portal Projects Broadband Internet Deployment & ISP Consultancy [image: View my profile on LinkedIn]View Olugbenga Oyebande's profile<http://ng.linkedin.com/pub/olugbenga-oyebande/15/395/8a9> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
