Hi fellas,
Guys, I have problem with the ( offset-list ) command, it is not working
properly, although my configuration area right, any thoughts please,
R8
R8(config-router)#do sr | s ei
router eigrp 7800
passive-interface default
no passive-interface FastEthernet0/0
no passive-interface Serial0/0
network 100.100.200.8 0.0.0.0
network 150.100.0.0
network 200.0.0.0
network 200.0.1.0
network 200.0.2.0
network 200.0.3.0
no auto-summary
router eigrp 12348
passive-interface default
no passive-interface Serial0/0
no passive-interface Serial0/1
offset-list 0 in 512000 Serial0/1
------------------------ ---------------- this is the required command,
but still it does not work ?
network 150.100.81.8 0.0.0.0
no auto-summary
R8(config-router)#do sir
150.101.12.0 -----------------------------> going to
cat-1, where it should be heading to R7 instead ?
Routing entry for 150.101.12.0/24
Known via "eigrp 12348", distance 90, metric 2707456, type internal
Redistributing via eigrp 12348
Last update from 150.100.81.108 on Serial0/1, 00:00:07 ago
Routing Descriptor Blocks:
* 150.100.81.108, from 150.100.81.108, 00:00:07 ago, via Serial0/1
Route metric is 2707456, traffic share count is 1
Total delay is 41000 microseconds, minimum bandwidth is 1544 Kbit
Reliability 255/255, minimum MTU 1500 bytes
Loading 1/255, Hops 1
neighbour relationship between R8 , R7 AND CAT1
R8(config-router)#DO sh ip ei nei
IP-EIGRP neighbors for process 7800
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
1 150.100.78.7 Se0/0 12 02:20:34 35 210 0 56
0 100.100.200.200 Fa0/0 11 02:20:34 49 294 0 21
IP-EIGRP neighbors for process 12348
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 150.100.81.108 Se0/1 10 02:20:34 128 768 0 82
R7
router eigrp 7800
redistribute ospf 2 route-map bgp2ospf
passive-interface default
no passive-interface Serial0/0
network 150.100.0.0
network 200.0.0.0
network 200.0.1.0
network 200.0.2.0
network 200.0.3.0
default-metric 1 1 1 1 1
no auto-summary
CAT 1
cat1#sr | s ei
router eigrp 12348
network 0.0.0.0
no auto-summary
cheers,
khaled
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
