Hi fellas,
My problem is that, I have my ospf neighbourship is up and running between
R5, R6 AND R7 but the problem is I can not see my ospf routing table it is
totally empty, any thoughts?
below are my configuration:
ospf neighourship for R5, R6 AND R7
R5#sh ip os nei
Neighbor ID Pri State Dead Time Address Interface
200.0.3.6 0 FULL/DROTHER 00:00:34 150.100.221.6
FastEthernet0/1
200.0.3.7 0 FULL/DROTHER 00:00:32 150.100.221.7
FastEthernet0/1
200.0.3.6 0 FULL/DROTHER 00:00:34 150.100.220.6
FastEthernet0/0
200.0.3.7 0 FULL/DROTHER 00:00:32 150.100.220.7
FastEthernet0/0
R5#
R5
hostname R5
router ospf 2
router-id 5.5.5.5
log-adjacency-changes
redistribute bgp 256 subnets route-map bgp2ospf
passive-interface default
no passive-interface FastEthernet0/0
no passive-interface FastEthernet0/1
network 150.100.220.0 0.0.1.255 area 567
R5 output
R5#sir os
O E1 209.202.63.0/24 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1
[110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0
O E1 192.168.12.0/24 [110/11] via 150.100.221.6, 00:11:06, FastEthernet0/1
[110/11] via 150.100.220.6, 00:11:06, FastEthernet0/0
O E1 192.168.13.0/24 [110/11] via 150.100.221.6, 00:11:06, FastEthernet0/1
[110/11] via 150.100.220.6, 00:11:06, FastEthernet0/0
O E1 207.134.253.0/24 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1
[110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0
O E1 192.1.13.0/24 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1
[110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0
O E1 207.102.171.0/24 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1
[110/11] via 150.100.220.6, 00:10:34, FastEthernet0/0
100.0.0.0/24 is subnetted, 3 subnets
O E1 100.100.100.0 [110/11] via 150.100.221.6, 00:10:34, FastEthernet0/1
[110/11] via 150.100.220.6, 00:10:36, FastEthernet0/0
O E1 100.100.200.0 [110/11] via 150.100.221.6, 00:10:36, FastEthernet0/1
[110/11] via 150.100.220.6, 00:10:36, FastEthernet0/0
O E1 100.100.250.0 [110/11] via 150.100.221.6, 00:11:08, FastEthernet0/1
[110/11] via 150.100.220.6, 00:11:08, FastEthernet0/0
O E1 192.168.14.0/24 [110/11] via 150.100.221.6, 00:11:08, FastEthernet0/1
R6
router ospf 2
log-adjacency-changes
redistribute bgp 256 subnets route-map bgp2ospf
passive-interface default
no passive-interface FastEthernet0/0
no passive-interface FastEthernet0/1
no passive-interface Serial1/0
network 150.100.220.0 0.0.1.255 area 567
R6 - output
R6#sir os
R6#
R6#
R6#
R7
router ospf 2
log-adjacency-changes
passive-interface default
no passive-interface FastEthernet0/0
no passive-interface FastEthernet0/1
network 150.100.220.0 0.0.1.255 area 567
permit ospf host 150.100.220.5 any
R7 --- output
R7#sir os
O E1 209.202.63.0/24 [110/11] via 150.100.221.6, 00:13:00, FastEthernet0/1
[110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0
O E1 192.168.12.0/24 [110/11] via 150.100.221.6, 00:13:32, FastEthernet0/1
[110/11] via 150.100.220.6, 00:13:32, FastEthernet0/0
O E1 192.168.13.0/24 [110/11] via 150.100.221.6, 00:13:32, FastEthernet0/1
[110/11] via 150.100.220.6, 00:13:32, FastEthernet0/0
O E1 207.134.253.0/24 [110/11] via 150.100.221.6, 00:13:00, FastEthernet0/1
[110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0
O E1 192.1.13.0/24 [110/11] via 150.100.221.6, 00:13:00, FastEthernet0/1
[110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0
O E1 207.102.171.0/24 [110/11] via 150.100.221.6, 00:13:00, FastEthernet0/1
[110/11] via 150.100.220.6, 00:13:00, FastEthernet0/0
100.0.0.0/24 is subnetted, 3 subnets
thanks,
khaled
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
