Hi Guys
Ok, Thanks to Bob for sending me the text file, however this does not
seem to do all that I need.
What started me thinking about this was that so far I have been working
through the labs from book 1 by building my own config in GNS3. Apart
from the first few, where the switches are a vital part of the lab, this
works pretty well, with a bit of care over the inevitable different
interface designations. However I have come to lab 13, where the CAT
switches need to take part in the BGP peering. So what I have been
trying to do is make the IPexpert GNS3 config work to do this. First
thing I found that I needed that I did not have was a cross reference
between the interfaces used on the actual Cat switches and the
interfaces that replace them in the GNS3 config, so I now have a
spreadsheet that does that. Next I need to get them configured to do as
much as possible, eg set up the appropriate trunking. At the moment I
am getting kind of bogged down in that..does anyone have any configs for
that, eg the equivalent of the initial configs as provided in the
workbooks, only for the GNS topology instead of the Cat switches. Or is
this not actually feasable? Which labs is the GNS3 topology really
useful for and which ones would I be better to do using rack time? I do
have lab time available on the Proctor labs, but find an eight hour
stretch a bit hard to schedule.
regards
John
On 1/08/2012 12:35 p.m., Bob McCouch wrote:
bob@lab:~/scripts$ cat ipx-config-fixups.txt
#######################################################
##### THIS IS NOT AN EXECUTABLE SCRIPT #####
#######################################################
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
