Yeah, I'm gonna end up doing v5. There aren't any more seats left and I am out of funds. I paid for everthing out of pocket. But I agree about getting back at it. I never get tired of this, although I'm a little burned out right now, but I can tell I won't be burned out for long. From: [email protected] To: [email protected]; [email protected] CC: [email protected]; [email protected] Subject: Re: [OSL | CCIE_RS] Took Lab Today Date: Sat, 12 Apr 2014 00:37:41 +0000
Get back and hit it hard. 90 days max until next attempt. Are you going to have to do v5? Sent from my Verizon Wireless 4G LTE Smartphone ------ Original message------ From: Bob McCouch Date: Fri, 4/11/2014 8:03 PM To: Rob Tyrrell; Cc: Kenyone Johnson;[email protected]; Subject:Re: [OSL | CCIE_RS] Took Lab Today Seconded. Sorry to hear of the miss, but most of us have experienced it at least once. You'll feel much more relaxed next time. Don't wait too long. I took about 4 months off after my first attempt, and I felt like I spent a LOT of time relearning rather than just honing. It's amazing how quickly you lose the edge when you're not studying constantly. Honestly, I miss being at that knife-edge state. It fades quickly after passing :-( Bob -- Sent from my iPhone, please excuse any typos. > On Apr 11, 2014, at 7:09 PM, Rob Tyrrell wrote: > > Sorry to hear. But failing the lab is always a valuable learning experience. > I've failed twice and am sitting again next week. I also have a CCIE widow > for a wife currently. My best advice is don't wait too long before picking a > date to try again. It's easy to wake up 6 months later and realize you forgot > most of what you studied. Perseverance will win in the end! > > Good luck. > > Rob > > > > Kenyone Johnson wrote: >> Hi Guys, >> >> I didn't pass. I haven't gotten the grade yet, but I didn't finish >> either portion. I'd already known I didn't pass it early this morning >> when I only answered 4 out of 10 t'shoot questions. I also didn't >> finish the configuration portion. But this was a great experience, and >> I do see the lab as "do'able." I'm gonna just take off a few months to >> catch up with my family (my fiancée will kill me if I start back >> studying as soon as I make it back home), then I'll start on version 5. >> I'll try holding off until September, but in the meantime, I want to >> learn more about DC. So i'll learn that, but it's no where near trying >> to study for an actual CCIE lab. Thanks guys for all your well wishes, >> and good luck to you upcomers! >> >> KJ >> >>> From: [email protected] >>> Subject: CCIE_RS Digest, Vol 99, Issue 9 >>> To: [email protected] >>> Date: Fri, 11 Apr 2014 12:00:08 -0400 >>> >>> Send CCIE_RS mailing list submissions to >>> [email protected] >>> >>> To subscribe or unsubscribe via the World Wide Web, visit >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs >>> or, via email, send a message with subject or body 'help' to >>> [email protected] >>> >>> You can reach the person managing the list at >>> [email protected] >>> >>> When replying, please edit your Subject line so it is more specific >>> than "Re: Contents of CCIE_RS digest..." >>> >>> >>> Today's Topics: >>> >>> 1. Question about exam (freddy morales) >>> 2. Re: Question about exam (marc abel) >>> 3. BGP NULL 0 route (Bodnar, Edward) >>> 4. Re: BGP NULL 0 route (Rob Tyrrell) >>> 5. Re: BGP NULL 0 route (Rob Tyrrell) >> ---------------------------------------------------------------------- >>> >>> Message: 1 >>> Date: Thu, 10 Apr 2014 23:30:23 +0000 >>> From: freddy morales >>> To: "[email protected]" >>> Subject: [OSL | CCIE_RS] Question about exam >>> Message-ID: >>> Content-Type: text/plain; charset="iso-8859-1" >>> >>> Hi, >>> >>> While doing different labs, i have noticed that sometimes in order to >> complete a task, you need to know what certain RFC is about or perhaps >> they tell you that you need to configure a dhcp server to support some >> type of service which requires you to know the specific option on DHCP. >> >>> >>> >>> My question is during the exam, will that information be given >> directly? or perhaps the proctor will be able to help knowing what RFC >> is that or perhaps what option number is the task referring to if you >> dont have it at the top of your head? >>> >>> >>> >>> ------------------------------ >>> >>> Message: 2 >>> Date: Thu, 10 Apr 2014 19:10:16 -0500 >>> From: marc abel >>> To: freddy morales >>> Cc: "[email protected]" >>> Subject: Re: [OSL | CCIE_RS] Question about exam >>> Message-ID: >>> >>> Content-Type: text/plain; charset=ISO-8859-1 >>> >>> I wouldn't expect much of that kind of help from the proctor. You >> should >>> probably know certain well known RFCs that relate to the blueprint >> topics. >>> You do have the documentation available to you. Know how to find >> things >>> before you go. >>> >>> >>> On Thu, Apr 10, 2014 at 6:30 PM, freddy morales >> wrote: >>> >>>> Hi, >>>> >>>> While doing different labs, i have noticed that sometimes in order >> to >>>> complete a task, you need to know what certain RFC is about or >> perhaps they >>>> tell you that you need to configure a dhcp server to support some >> type of >>>> service which requires you to know the specific option on DHCP. >>>> >>>> >>>> My question is during the exam, will that information be given >> directly? >>>> or perhaps the proctor will be able to help knowing what RFC is >> that or >>>> perhaps what option number is the task referring to if you dont >> have it at >>>> the top of your head? >>>> >>>> >>>> _______________________________________________ >>>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security >> Videos :: >>>> >>>> iPexpert on YouTube: www.youtube.com/ipexpertinc >>> >>> >>> >>> -- >>> Marc Abel >>> CCIE #35470 >>> (Routing and Switching) >>> >>> >>> ------------------------------ >>> >>> Message: 3 >>> Date: Thu, 10 Apr 2014 20:03:26 -0500 >>> From: "Bodnar, Edward" >>> To: "[email protected]" >>> Subject: [OSL | CCIE_RS] BGP NULL 0 route >>> Message-ID: >> <87ed2f20c514524781004420d30188cd7570f34...@usea-exch8.na.uis.unisys.com> >>> >>> Content-Type: text/plain; charset="us-ascii" >>> >>> Anybody know how to get rid of a NULL 0 route in BGP ? I know it >> should be there for loop prevention I want to remove it to prove the >> loop then put it back in again. Problem is I can't figure out how to >> remove the NULL route. >>> >>> I am using the aggregate-address command. >>> >>> >>> ------------------------------ >>> >>> Message: 4 >>> Date: Thu, 10 Apr 2014 22:20:08 -0400 >>> From: Rob Tyrrell >>> To: "Bodnar, Edward" >>> Cc: "[email protected]" >>> Subject: Re: [OSL | CCIE_RS] BGP NULL 0 route >>> Message-ID: <[email protected]> >>> Content-Type: text/plain; charset=us-ascii >>> >>> You can poison the dynamically added route to Null0 if you want to >> remove it: >>> >>> http://www.netbraintech.com/free-tools/qmap-reader/qmap-center.php >>> >>> >>> distance bgp >>> The Null0 route is a local route. Set to 255 to poison it. >>> >>> >>> HTH, >>> >>> Rob >>> >>> >>> >>>> On Apr 10, 2014, at 9:03 PM, Bodnar, Edward >>> wrote: >>> >>>> Anybody know how to get rid of a NULL 0 route in BGP ? I know it >> should be there for loop prevention I want to remove it to prove the >> loop then put it back in again. Problem is I can't figure out how to >> remove the NULL route. >>>> >>>> I am using the aggregate-address command. >>>> _______________________________________________ >>>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security >> Videos :: >>>> >>>> iPexpert on YouTube: www.youtube.com/ipexpertinc >>> >>> >>> >>> ------------------------------ >>> >>> Message: 5 >>> Date: Thu, 10 Apr 2014 22:25:47 -0400 >>> From: Rob Tyrrell >>> To: "Bodnar, Edward" >>> Cc: "[email protected]" >>> Subject: Re: [OSL | CCIE_RS] BGP NULL 0 route >>> Message-ID: >>> Content-Type: text/plain; charset=us-ascii >>> >>> Bad link before. This should help: >> http://www.netbraintech.com/admin/qmap_cms/qmapfiles/2012121431720.png >>> >>> >>> >>>> On Apr 10, 2014, at 10:20 PM, Rob Tyrrell wrote: >>>> >>>> You can poison the dynamically added route to Null0 if you want to >> remove it: >>>> >>>> http://www.netbraintech.com/free-tools/qmap-reader/qmap-center.php >>>> >>>> >>>> distance bgp >>>> The Null0 route is a local route. Set to 255 to poison it. >>>> >>>> >>>> HTH, >>>> >>>> Rob >>>> >>>> >>>> >>>> On Apr 10, 2014, at 9:03 PM, Bodnar, Edward >> wrote: >>>> >>>>> Anybody know how to get rid of a NULL 0 route in BGP ? I know >> it should be there for loop prevention I want to remove it to prove the >> loop then put it back in again. Problem is I can't figure out how to >> remove the NULL route. >>>>> >>>>> I am using the aggregate-address command. >>>>> _______________________________________________ >>>>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security >> Videos :: >>>>> >>>>> iPexpert on YouTube: www.youtube.com/ipexpertinc >>>> >>>> _______________________________________________ >>>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security >> Videos :: >>>> >>>> iPexpert on YouTube: www.youtube.com/ipexpertinc >>> >>> >>> >>> >>> ------------------------------ >>> >>> _______________________________________________ >>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos >> :: >>> >>> iPexpert on YouTube: www.youtube.com/ipexpertinc >>> >>> End of CCIE_RS Digest, Vol 99, Issue 9 >>> ************************************** >> >> _______________________________________________ >> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos >> :: >> >> iPexpert on YouTube: www.youtube.com/ipexpertinc > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
