Where is the esp access-list in the pix for R2 to R5  IPsec Tunnel in
the Final Configurations of the pix ? 

 

------------------------------------------------------------------------
-----------------------------------------------------------------------

ROIE BEN HAIM | Networking & Security Engineer, Professional Services |
Bezeq International. 

Tel: +972 3 9257 7331 | Mob: +972 50 6014 017 | E-Mail:
[EMAIL PROTECTED] 

------------------------------------------------------------------------
-----------------------------------------------------------------------

 

<<imp_bezeqint_3eGj0.jpg>>

pixfirewall# show run
: Saved
:
PIX Version 7.2(2) 
!
hostname pixfirewall
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!
interface Ethernet0
 nameif outside
 security-level 0
 ip address 192.1.24.10 255.255.255.0 
!
interface Ethernet0.5
 vlan 5
 nameif DMZ5
 security-level 50
 ip address 10.5.5.10 255.255.255.0 
!
interface Ethernet1
 nameif inside
 security-level 100
 ip address 10.2.2.10 255.255.255.0 
!
interface Ethernet2
 shutdown     
 no nameif
 no security-level
 no ip address
!
interface Ethernet3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet4
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet5
 shutdown
 no nameif
 no security-level
 no ip address
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list infilter extended permit udp host 192.1.24.2 host 192.1.24.5 eq 
isakmp 
access-list infilter extended permit udp host 192.1.24.2 host 192.1.24.5 eq 
4500 
access-list infilter extended permit icmp any any 
access-list 1022-4 extended permit ip 10.2.2.0 255.255.255.0 4.0.0.0 255.0.0.0 
pager lines 24
mtu outside 1500
mtu DMZ5 1500
mtu inside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
static (DMZ5,outside) 192.1.24.5 10.5.5.5 netmask 255.255.255.255 
access-group infilter in interface outside
!
router rip
 network 10.0.0.0
 network 192.1.24.0
 default-information originate
 version 2
 no auto-summary
!
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set secure esp-des esp-md5-hmac 
crypto map secure 10 match address 1022-4
crypto map secure 10 set peer 192.1.24.4 
crypto map secure 10 set transform-set secure
crypto map secure interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption des
 hash sha
 group 2
 lifetime 86400
crypto isakmp policy 65535
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
tunnel-group 192.1.24.4 type ipsec-l2l
tunnel-group 192.1.24.4 ipsec-attributes
 pre-shared-key *
telnet timeout 5
ssh timeout 5
console timeout 0
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect netbios 
  inspect rsh 
  inspect rtsp 
  inspect skinny 
  inspect esmtp 
  inspect sqlnet 
  inspect sunrpc 
  inspect tftp 
  inspect sip 
  inspect xdmcp 
!
service-policy global_policy global
prompt hostname context 
Cryptochecksum:1338106633e6ecae7802e8628e0e5fdd
: end
pixfirewall# 

Reply via email to