Yep, I also though about that solution. The appropriate ACL entry is
present in the PG.
So whats correct: static pat or static nat?
Cheers
Simon
Am 20.05.2009 um 20:23 schrieb Stuart Hare:
The solution was to use static pat / port forwarding not static nat
if i remember right.
static (dmz8,out) tcp 192.1.24.8 23 10.8.8.8 23 net 255.255.255.255
Stu
On Wed, May 20, 2009 at 2:09 PM, Simon Baumann <[email protected]
> wrote:
Hi,
the task 1.7 in Lab1A requests: R4 should be able to manage R8 using
telnet. R4 should see R8 as 192.1.24.8. Allow the appropriate
filtering on the ASA.
So the solution would be:
static (DMZ8,outside) 192.1.24.8 10.8.8.8 netmask 255.255.255.255
I compared my solution with the PG, but this static entry isn't
present there. Did I miss something? TIA.
Cheers
Simon
--
Stuart Hare
[email protected]
