Michael,
That is correct. If the summary has the same distance as the more specific the more specific will be suppressed. Good Catch. Regards, Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Cell: +1.248.504.7309 Fax: +1.810.454.0130 Mailto: [email protected] Join our free online support and peer group communities: <http://www.IPexpert.com/communities> http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: [email protected] [mailto:[email protected]] On Behalf Of Michael Davis Sent: Wednesday, June 10, 2009 8:16 AM To: [email protected] Subject: [OSL | CCIE_Security] Lab 1A - objective 1.5 Hi Everyone - I am new to this list, so here is my first post. I am studying for the CCIE sec lab, and have completed the volume 1 workbooks. I am now on lab 1A, objective 1.5 on the updated material - configure SLA monitoring for the default route to R2 (192.1.24.2). I configured the SLA monitoring as per the proctor guide, configuring the backup route to 192.1.24.4 with a distance of 5 and noticed that when I shut the interface on R2, that the route to R4 was not coming up. Instead I was getting a Null0 route created by eigrp to 0.0.0.0 0.0.0.0. I removed the eigrp summary address command from earlier in the lab and the route appeared correctly. Then after doing a show run I noticed this - interface Ethernet0/0.7 summary-address eigrp 200 0.0.0.0 0.0.0.0 5 My summary address also had a distance of 5 - put there by the IOS - I did not specify this. When I made my static backup route to 192.1.24.4 with a cost of 4, it worked! Did anyone else notice this?? One to look out for...
