Tyson,
My config is duplicated off the proctor guide. I will do the lab soon then I will send the config. Johan From: Tyson Scott [mailto:[email protected]] Sent: 22 June 2009 04:42 To: 'Johan Bornman'; 'Jared Scrivener'; [email protected] Subject: RE: [OSL | CCIE_Security] Lab7A - Task 7.2 Johan can you show us the ACL you have configured. Regards, Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Cell: +1.248.504.7309 Fax: +1.810.454.0130 Mailto: [email protected] Join our free online support and peer group communities: <http://www.IPexpert.com/communities> http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: [email protected] [mailto:[email protected]] On Behalf Of Johan Bornman Sent: Sunday, June 21, 2009 8:27 AM To: 'Jared Scrivener'; [email protected] Subject: Re: [OSL | CCIE_Security] Lab7A - Task 7.2 It's the 2nd time I am doing this lab and I got this error every time. I also checked the config for an existing rule. From: Jared Scrivener [mailto:[email protected]] Sent: 21 June 2009 12:22 To: Johan Bornman; [email protected] Subject: Re: [OSL | CCIE_Security] Lab7A - Task 7.2 The error implies that you are entering the same rule multiple times. On 6/21/09 4:55 PM, "Johan Bornman" <[email protected]> wrote: I get this error: R2(config)#access-list 1 deny 10.7.8.8 % Access rule can't be configured at higher sequence num as it is part of the existing rule at sequence num 10 What am I doing wrong? Thanks Johan Cheers, Jared Scrivener CCIE3 #16983 (R&S, Security, SP), CISSP Sr. Technical Instructor - IPexpert, Inc. URL: http://www.IPexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [email protected]
<<attachment: winmail.dat>>
