Tyson,
Is it good practise to get all the devices on 12.4T before I start the lab or is there a reason for the other image? Thanks Johan From: Tyson Scott [mailto:[email protected]] Sent: 29 June 2009 19:28 To: 'Johan Bornman'; [email protected] Subject: RE: [OSL | CCIE_Security] Lab6A Task 6.3 R6 doesn't have 12.4T on it on the rack you are on. Do a show version. Add the command Boot system flash:c2800...12.422. Reboot 2 would be a small typo. Regards, Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Cell: +1.248.504.7309 Fax: +1.810.454.0130 Mailto: [email protected] Join our free online support and peer group communities: <http://www.IPexpert.com/communities> http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: [email protected] [mailto:[email protected]] On Behalf Of Johan Bornman Sent: Monday, June 29, 2009 11:50 AM To: [email protected] Subject: [OSL | CCIE_Security] Lab6A Task 6.3 Problem 1: R5 works fine: Class-map type port-filter Task63 R6 does not: R6(config)#class-map ? WORD class-map name match-all Logical-AND all matching statements under this classmap match-any Logical-OR all matching statements under this classmap Problem 2: In the proctor guide the following command applies: crypto key generate rsa usage-keys 1024 but this command does not work without modulus in the command, is this a typo in the guide? crypto key generate rsa usage-keys modulus 1024
