Hi All, 1. I want to configure static port redirection for telnet traffic so that any host tries to telnet outside interface of ASA then it will go to inside host (router) connected to inside interface.
While I am configuring this by "static (inside,outside) tcp interface telnet 136.1.121.13 telnet" command it gives me error "ERROR: unable to reserve port 23 for static PAT ERROR: unable to download policy". After looking the configuration I found that "telnet 0 0 outside" is configured. And when I removed this telnet command, ASA accepts above static pat command without any error. Is this behaviour correct? 2. Another behaviour is that ASA does not allow to use interface ip address when configuring static PAT using interface. It forces to use "interface" keyword. The error is "ERROR: Static PAT using the interface requires the use of the 'interface' keyword instead of the interface IP address". But same is not mentioned in configuration guide. In fact they have shown examples with interface ip address in config guide. I am getting confuse on this. Kindly explain above behaviour. Thanks & Regards D.M.Gore
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
